kick starter problem

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
peete
Noob
Noob
Posts: 2
Joined: Mon Jul 23, 1973 10:24 am

kick starter problem

Post by peete »

i was having trouble keeping the engine running,i found out i needed a new fuel valve (the one located beneath the tank) after installing this i pushed down a couple times to start engine and the kick starter hung up and now it will not go down.do i need to pull the side cover off and look inside? any help would be greatly appreciated.
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

try loostebing the bolts and pull cover out a little, it should snap back. this could be a good indication u will be buying some new kickstart parts in the future tho.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
User avatar
tlcbob
Noob
Noob
Posts: 5
Joined: Fri Nov 26, 2004 11:30 pm

kickstart

Post by tlcbob »

I just had that problem. The spring was stuck because the retaining clip for the kickstart had come loose. Open it up and you should be able to reset it. assuming the gears are in good shape. Dont for get to lube while you're in there!
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

not too much. be careful none of that crap gets on the belt/clutch.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
Post Reply