specifics on intake mod

SPREEtown · Post by **SPREEtown** » Thu Jan 10, 2008 11:52 pm

so im looking to grind out this "lump" on the intake of my spree that ive heard about. where is this and where is the intake? is it off the air box? and once this is completed what are the effects? better high or low end?[/img]

chevyguyjay · Post by **chevyguyjay** » Fri Jan 11, 2008 2:39 pm

sigh.........................

Kenny_McCormic · Post by **Kenny_McCormic** » Fri Jan 11, 2008 3:30 pm

Look in performance tech docs.

Farfignugin · Post by **Farfignugin** » Fri Jan 11, 2008 10:03 pm

You should learn to read the "Before you post, read this!" topic...I believe one of them (there is one in each area of the forum) explains to search the forum for your question before posting.

SPREEtown · Post by **SPREEtown** » Sun Jan 13, 2008 9:23 pm

uhhh ive searched, and then i searched some more, and then i just looked through posts. i didnt find anything that was specific. so if you have, please post a link to the page. or post useful information on this thread. thanks.

Kenny_McCormic · Post by **Kenny_McCormic** » Sun Jan 13, 2008 10:59 pm

http://www.hondaspree.net/phpBB2/viewtopic.php?t=1339 not the best pics and he didint go all the way but you get the idea.

SPREEtown · Post by **SPREEtown** » Tue Jan 15, 2008 11:36 pm

im looking for a little more indepth about locating and removing the intake

Kenny_McCormic · Post by **Kenny_McCormic** » Wed Jan 16, 2008 3:49 pm

If you dont know where it is you probably shouldnt be messing with it.

chevyguyjay · Post by **chevyguyjay** » Wed Jan 16, 2008 4:05 pm

lol

stillspeeding · Post by **stillspeeding** » Thu Jan 17, 2008 1:32 am

you can hone, mill & bore all you want but without a gear ratio change you will only create torque+heat- not speed!

Kenny_McCormic · Post by **Kenny_McCormic** » Thu Jan 17, 2008 3:16 pm

stillspeeding wrote:you can hone, mill & bore all you want but without a gear ratio change you will only create torque+heat- not speed!

PULLY MOD