gears 15X42

[happyman]

woupd anyone know what the 15X42 gear rario is by chance?
Thanks
Happy

[itzmepete]

You sure its 15 x 42?

I KNOW for SURE that 16x42 is a 9 to 1 and a 17x41 is 8:44 to 1.
These are for Final drive gears now. I would think if its 15 that the other gear has to be 43 for it all to fit and work but I could be wrong.

Thats all I know.

I just ordered a set of 17x41 from an ebay seller at $29 plus $19 shipping $48 total. Also found another place taht sells them slightly cheaper called Scooter Asassins. They have a website but also sell on ebay

[happyman]

i wish i knew how they figure this gear stuff out. just went back and counted and its 15X 42.. someone must have made a big mistake in packaging. i guess i will have to just wait for the proper gears is all. i think the 8.44 is a decent choice for what i am doing.
i know there are some pretty good deals out there, and am going to look around some too

You sure its 15 x 42?

I KNOW for SURE that 16x42 is a 9 to 1 and a 17x41 is 8:44 to 1.
These are for Final drive gears now. I would think if its 15 that the other gear has to be 43 for it all to fit and work but I could be wrong.

Thats all I know.

I just ordered a set of 17x41 from an ebay seller at $29 plus $19 shipping $48 total. Also found another place taht sells them slightly cheaper called Scooter Asassins. They have a website but also sell on ebay

[itzmepete]

Who did you buy it from? Did you trial fit it and see if it still worked anyway? If it does, those numbers should give you somewhere near just above 9 to 1.

[happyman]

Who did you buy it from? Did you trial fit it and see if it still worked anyway? If it does, those numbers should give you somewhere near just above 9 to 1.

called vt cycles where i got the gears and they said its a 9.8 or so gear.. they will replace them for the correct set.