help with my build

greg_bingham · Post by **greg_bingham** » Sun Apr 13, 2008 10:10 pm

okay....

i've got a '98 engine coming from ebay. cases, crank, gears and a few other things-

do the electrical bits from the sb50 interchange with the 94+ motor?

here's an interesting excercise- if you had about ~1200 budget to build a motor, how would you go, and where would you source the parts?

ah also will the better forks off the newer elites interchange with the older models? (mine's an 89)...

greg

burnt_toast · Post by **burnt_toast** » Mon Apr 14, 2008 11:39 am

Here's a good place to start:
http://www.hondaspree.net/phpBB2/viewtopic.php?t=4807

I've spent about $600-800 so far.

And noticed, your in Texas where is Tomball at? I'm in San Antonio.

Dac · Post by **Dac** » Mon Apr 14, 2008 1:46 pm

Tomball Texas is about 211 miles east of you Burnt_Toast . ( 3.3 hour drive)

I guess with that much money i would have to say a mini stroker with a Polini Corsa bore kit. ( 100% what Burnt Toast has)

you might have enough to go full stroker but that really takes allot of time/money. I would go mini stroker.

greg_bingham · Post by **greg_bingham** » Mon Apr 14, 2008 8:02 pm

where do you guys buy all your stuff?

greg_bingham · Post by **greg_bingham** » Mon Apr 14, 2008 8:04 pm

i'm on the north side of houston.

a bit east of san antone...

greg

Dac · Post by **Dac** » Mon Apr 14, 2008 8:26 pm

i personally get all my stuff from VTCycles. But i know burnt toast got most of his stuff from other people in hawaii.
i know Burnt_Toast also gets stuff from a place near him. I believe its called something like 'stroke it'. Were they sell stroker motor parts. Im sure he will post under me with a link for you.

As much as i hate posting this link...
ForumsHawaii.Net - Moped and Scooters Enthusiasts.
In the wanted/for sale part of that forum there is a ton of people with good cheap parts. But that site is full of full grown adults that act like 5 year olds. And 2/3rd of the people there are 'e-gangsters'. But i know that people do sell allot of stuff there.
I would go with VT cycles way way way before i would buy any parts from anybody on that site. VTcycles webpage is way out of date so just call them up for real up to date info. Those guys that work there are very cool. They will set you up with real good deals too.

greg_bingham · Post by **greg_bingham** » Mon Apr 14, 2008 9:04 pm

holy crap all the bad english/grammar over there is burning my eyes!!

da
dat
forealz

Dac · Post by **Dac** » Mon Apr 14, 2008 9:56 pm

yeah...
i don't like that site to much. i was more less just giving you a link so you have it for future when you are looking to buy parts.

burnt_toast · Post by **burnt_toast** » Tue Apr 15, 2008 12:42 am

For sure, I had to surf through lots of garbage until I finally found some good people to talk to advice and buy parts from over there.

Dac mentioned Strokeitimports.com but they mostly carry jog type big bore parts, not dio.

maddog · Post by **maddog** » Wed Apr 16, 2008 6:54 am

you can build a basic quality 72cc setup for about $500 the trick is know what other certain parts to use that are not listed on the internet.

burnt_toast · Post by **burnt_toast** » Wed Apr 16, 2008 11:12 am

maddog wrote:you can build a basic quality 72cc setup for about $500 the trick is know what other certain parts to use that are not listed on the internet.

It's true, the best info on dio's you can't really find by typing it on google but the info is there if you look hard enough.

greg_bingham · Post by **greg_bingham** » Wed Apr 16, 2008 10:56 pm

interesting-

i'mcertainly not looking to re-invent the wheel, i'll be asking questions when i get to those points..

right now,i have to get what i've got into the beadblaster cabinet...

greg

burnt_toast · Post by **burnt_toast** » Thu Apr 17, 2008 4:34 am

greg_bingham wrote:interesting-

i'mcertainly not looking to re-invent the wheel, i'll be asking questions when i get to those points..

right now,i have to get what i've got into the beadblaster cabinet...

greg

yeah seriously, your cases look like they had a pretty rough life. Post up pics asap when you get em freshened up!