Loss of top end, especially when warm -- reed problem???

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
CharlotteSpreeRider
Veteran OG
Veteran OG
Posts: 710
Joined: Tue Sep 11, 2007 2:13 pm
Location: Sanford, FL
Contact:
Contact CharlotteSpreeRider

Post by CharlotteSpreeRider »

I took the carb off to clean/check it again. I pulled the reeds off this time and it looks like there is a gouge in the plastic reed holder that could be allowing exhaust to leak backwards into the carb:

Image

I have another reed holder that I'm currently cleaning the old gasket off of. Hopefully this is the problem. It was sputtering badly. It's gotten worse and worse. Like it used to run at 30 MPH wide open and sound like it was really working. Now, it will only get up to 30 on a downhill, and it sputters when it goes faster than the motor would pull it on level ground.

I've got a reed holder that is in MUCH better shape that I've cleaned up. I'll put in on in the morning, and hopefully that fixes the problem.

At this point, it's either that, or I dissolved the baffles in the muffler by letting it soak in drain cleaner overnight and need a new muffler.

-aseigler
Image
Top
Kenny_McCormic
CBR1000RR
CBR1000RR
Posts: 4957
Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan

Post by Kenny_McCormic »

You cant dissolve the baffles without destroying the rest of the muffler.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
Top
Post Reply

Return to “Technical Help”