spot my errors...

Dac · Post by **Dac** » Wed Nov 07, 2007 9:27 pm

ok so i just posted some picture tutorials in the Advance Tech Docs part of this site. I know after working on them for so long i know no matter how many times i read it im going to miss my errors. and since you guys cant point out my errors there just post them here and ill fix them.
Or if theres any tips you want me to add. or if one of my facts is wrong. just please point it out and ill try to fix it.

''How to Install a Bore Kit''

''How To Install a Gear Set.''

"How to Install a New Center Spring"

"How to Check the Rollers for Flat Spots."

"How to Clean your Carburetor.{easy}"

jeremydde · Post by **jeremydde** » Fri Nov 09, 2007 2:51 am

You might wanna modify the part where you describe installing the rings, then the piston into the bore. Chances are that if you need a "how-to" to install your bore you may not be too observant that the rings have to fit in the ringlands at ~10 and 2 to lock them in place properly. And if they didn't complete that step then putting the piston into a well oiled bore means nothing. It may even result in a broken ring once frustration sets in.

Dac · Post by **Dac** » Fri Nov 09, 2007 8:28 am

ok ill make sure to add that to it tonight. i also just realized that i didn't put anything along the line of 'when putting the piston in the > or EX faces the exhausts port. Ill have to update that when i get back from work.

Dac · Post by **Dac** » Sat Nov 10, 2007 9:09 pm

ok i fixed that. any other things i messed up?

Kenny_McCormic · Post by **Kenny_McCormic** » Sun Nov 11, 2007 11:12 am

You might want to add that when putting the hed back on tourqe al the bolts down in an X pattern kinda like changing a car tire.

Dac · Post by **Dac** » Mon Nov 12, 2007 2:03 pm

ok i just got 'how to install a gear set' up. any one see any errors in that one?

Kenny_McCormic · Post by **Kenny_McCormic** » Tue Nov 13, 2007 9:02 pm

I havent had mine apart yet but isnt the clutch spring loaded and liable to fly apart if your not holding on?

Dac · Post by **Dac** » Tue Nov 13, 2007 9:17 pm

give me a day or 2. one of the tut's im making is how to change the clutch center spring. i just got to type it all out.

Dac · Post by **Dac** » Thu Nov 15, 2007 9:03 pm

ok, how to install a new compression spring is up. Kenny_McCormic , i got this one up so fast for you.

Dac · Post by **Dac** » Sat Dec 15, 2007 10:46 am

Just to let every one know again, they all are up. If you have a moped that can be modded you might want to take a peek.

Also- Stop my errors! i cant seem to see any where were i messed up. but i know theres got to be something. Point them out and ill fix them.

Tips?
If you have any tips that you would like me to add to it let me know and i will. Im sure there is ways of doing it that are different from mine.

strapped9 · Post by **strapped9** » Sat May 17, 2008 1:32 am

you might mention the upper rod bearings in the installing bore thread. everything else looks great. fantastic job with these how to's.

stillspeeding · Post by **stillspeeding** » Thu May 22, 2008 4:53 am

Post the "how to rob a bank" article, this may fix the * poor michigan reputation for building half * projects

Kenny_McCormic · Post by **Kenny_McCormic** » Thu May 22, 2008 3:39 pm

stillspeeding wrote:Post the "how to rob a bank" article, this may fix the * poor michigan reputation for building half * projects

f*** off, quit wasting bandwidth.

Elite1998 · Post by **Elite1998** » Thu May 22, 2008 9:42 pm

Kenny_McCormic wrote:
stillspeeding wrote:Post the "how to rob a bank" article, this may fix the * poor michigan reputation for building half * projects
f*** off, quit wasting bandwidth.

Agreed!

Dac · Post by **Dac** » Thu May 22, 2008 9:58 pm

there isnt anything we can do about him. We ban him and he just comes right back.
Its happen once before.

i guess we all just have to deal with trying to understand what he is saying and deal with is stupid comments about us.

Honda Spree and Elite 50 Forums

spot my errors...

spot my errors...

Piston Rings

oops