ASN Gears ??

Karman · Post by **Karman** » Tue Jun 03, 2008 11:17 pm

Has anyone installed these?

They seem to be all thats available right now in 8.44. The only issue is, the spline gears were not machined correctly. Its the same problem itzmepete reported a while back with some Taiwanese gears. They look like this (ASN on the left, stock on the right):

Instead of teeth, it has grooves. Is this a problem or nothing to worry about?

Dac · Post by **Dac** » Wed Jun 04, 2008 12:06 am

never heard of them. were did you find them?

stillspeeding · Post by **stillspeeding** » Wed Jun 04, 2008 12:43 am

plenty of gear ratios, only these shops are not on the internet

tru72 · Post by **tru72** » Wed Jun 04, 2008 1:31 am

you see that brand of gears all over hawaii....

Karman · Post by **Karman** » Wed Jun 04, 2008 8:11 am

never heard of them. were did you find them?

Got them from Daywot. Thought I was getting Koso, but this was apparently all he had.

plenty of gear ratios, only these shops are not on the internet

Huh?

you see that brand of gears all over hawaii....

Will they work? I'm concerned about the spline gears (or lack thereof).

burnt_toast · Post by **burnt_toast** » Wed Jun 04, 2008 12:03 pm

I would be concerned too, since those splines are what transfer all your force onto the next gear.

I would try to pull your gear cover off and see how the ASN gear fits, and if it noticeibly doesn't grab as well, no press fit so should be an easy test.