exhaust baffle mod how-to

evilone · Post by **evilone** » Thu Jun 19, 2008 9:07 pm

I tore my crap muffler apart to see what was rattling. Notice the drill bit inside muffler? Well, I figured i'd post a pic to show others where the 2 baffles are (near exhaust outlet) and how long bit needs to be. Anyone got an un-modified se50s muffler for 87 elite?

CharlotteSpreeRider · Post by **CharlotteSpreeRider** » Thu Jun 19, 2008 9:24 pm

So it was the drill bit rattling???

evilone · Post by **evilone** » Thu Jun 19, 2008 9:38 pm

Yep, someone drilled baffles then plugged the holes in one step!

johndej · Post by **johndej** » Thu Jun 19, 2008 10:23 pm

This has been very helpful. Thank you all for your information.

CharlotteSpreeRider · Thu Jun 19, 2008 10:25 pm

Wow. I wonder if that is what is stuck in my old muffler now. It rattles like crazy and sounds like it has something about that same size stuck in it.

-aseigler

Karman · Post by **Karman** » Fri Jun 20, 2008 8:08 am

Once, I tore apart a type IV volkswagen engine (for a Porsche 914) in preparation for a rebuild and found a Snap-On swivel plug socket in between one of the heads and cooling tin. Someone was swapping the plugs, dropped their socket in there and just wrote it off instead of pulling it out. Must have been wonderful for cooling.

mopedman · Post by **mopedman** » Fri Jun 20, 2008 9:58 am

we have lost like 10 sockets to my buddy's car and don't know were they are, all we know is they never made it out

Honda Spree and Elite 50 Forums

exhaust baffle mod how-to

exhaust baffle mod how-to

Thank you!