What is your top MPH?

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

DorkoElite303
Spree
Spree
Posts: 209
Joined: Thu May 01, 2008 11:09 am

What is your top MPH?

Post by DorkoElite303 »

I hope I posted this in the right thread, but

What is your top speed/MPH? What is your make and model and what set-up are you running?
Down hill? Up Hill?
User avatar
Dac
Veteran OG
Veteran OG
Posts: 3340
Joined: Sat May 05, 2007 5:58 pm
Location: SouthWest Michigan
Contact:

Post by Dac »

1996 honda elite 50
gear swap, high speed pulley. about $100 in parts

50mph.
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
SPREEtown
Spree
Spree
Posts: 196
Joined: Tue Aug 21, 2007 6:07 am
Location: seattle, wa
Contact:

Post by SPREEtown »

86 spree- 45+mph DOWN hill; 38 on the flats
1986 Spree SE:
  • pulley mod
    '85 head
    SB50 intake, reeds, carb
    UNI filter
    44mm bbk
    3x10 conti zipps
    next:
    taz gears, sa50 clutch w/ 2k springs
DorkoElite303
Spree
Spree
Posts: 209
Joined: Thu May 01, 2008 11:09 am

Post by DorkoElite303 »

Opps Sorry....forgot to do mine.

98 Honda Elite SR
85cc, pully, 28mm carb, light fly wheel, blue center spring, yellow clutch springs, 135jet, 55 pilot jet, CDI, no gears.

49mph flat, 51pmh down hill, and about 43 up hill <---GPS reading
User avatar
ubcnme
Noob
Noob
Posts: 16
Joined: Thu Jun 26, 2008 2:37 am
Location: Maui Hawaii

??

Post by ubcnme »

Mines was 110 KPH or 68 MPH on flats and up hill about 70 KPH or 43 MPH. Being I weigh 280lbs. 72cc Polini Corsa, Ported and polished block, 28 OKO carb 140 main 48 pilot, 8-4.1 gearing, ZX Trans, Daytona White center spring and yellow Polini clutch springs running Kitaco light weight clutch, Scorpion X-Factor exhaust.
User avatar
mopedman
CB900F
CB900F
Posts: 1213
Joined: Mon Jul 23, 1973 10:24 am
Location: sterling Heights MI
Contact:

Post by mopedman »

1995 elite s 38mph til my parts get in
Michigan Moped Mafia founding member
2005 Yamaha Zuma
1985 Honda Spree
1978 Honda Express
User avatar
GIJoeBob
Elite
Elite
Posts: 760
Joined: Thu Aug 23, 2007 4:40 pm
Location: Nacogdoches, Texas
Contact:

Post by GIJoeBob »

1985 stock Spree - 30mph
1987 stock Elite 50s - 38mph
User avatar
cf_z
Spree
Spree
Posts: 129
Joined: Thu Jun 26, 2008 11:55 pm
Location: NorthEast IN

Post by cf_z »

i prolly pushed mine up to about 5 mph on the way home after i bought it ;).
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3469
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Post by burnt_toast »

01 Elite SR72 Ruima ministroked Polini Corsa, 28mm OKO, PG Long, yaddiyada.. lots more

73.8 MPH GPS'd on flats w/ 6g weights, 68 MPH w/ 5.3g, 2k center for normal riding. I weigh 140lbs
projects galore :nerd:
keithw
Elite
Elite
Posts: 392
Joined: Sun Apr 27, 2008 11:40 am
Location: North Las Vegas, Nevada

Post by keithw »

89 Pal Tuned pipe, ported intake manifold, modified air box, 80 main jet.

40 mph, level ground, gps

keithw
Honda Pal (Speed-o-scooter) JDM Spree with varator trans.
Honda Spree, 1985.
Another Honda Pal

Let's give it a try, how hard could it be?
User avatar
Dac
Veteran OG
Veteran OG
Posts: 3340
Joined: Sat May 05, 2007 5:58 pm
Location: SouthWest Michigan
Contact:

Post by Dac »

DorkoElite303 wrote:Opps Sorry....forgot to do mine.

98 Honda Elite SR
85cc, pully, 28mm carb, light fly wheel, blue center spring, yellow clutch springs, 135jet, 55 pilot jet, CDI, no gears.

49mph flat, 51pmh down hill, and about 43 up hill <---GPS reading
my god, get some gears!
like 7:1.
your top speed will jump up amazing.
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
Elite1998
Spree
Spree
Posts: 136
Joined: Fri May 16, 2008 10:05 pm

Post by Elite1998 »

1998 Elite..9.1 gears, highspeed pully..9g rollers..2 baffles pounded out(yes pounded..didn't have a long enough drill bit) everything else is stock.. average 45-48 mph..highest 53-55mph(wind at my back on a flat road)
Honda Elite SA50-S

Stock motor, 9:1 gears, Kelli High speed pulley=a top speed of ?? Maxed the speedo out if that counts..average 45 mph
average 85 mpg
Kenny_McCormic
CBR1000RR
CBR1000RR
Posts: 4957
Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan

Post by Kenny_McCormic »

28 on level ground, got it to 30 on a slight downhill, roads around here make past 30 too scary. 86 spree with drilled exhaist and ported intake manifold.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
DorkoElite303
Spree
Spree
Posts: 209
Joined: Thu May 01, 2008 11:09 am

Post by DorkoElite303 »

Dac wrote:
DorkoElite303 wrote:Opps Sorry....forgot to do mine.

98 Honda Elite SR
85cc, pully, 28mm carb, light fly wheel, blue center spring, yellow clutch springs, 135jet, 55 pilot jet, CDI, no gears.

49mph flat, 51pmh down hill, and about 43 up hill <---GPS reading
my god, get some gears!
like 7:1.
your top speed will jump up amazing.
I Know I know....I was suppose to get a brand new gasket for the gear cover. But they ran out. I got the 7.5 to 1 gear. I've had it as long as I had the Elite....but just to lazy to find a bench press. NOw that I have a press, I don't have a replacement gasket for the gear cover.
User avatar
evilone
Board Supporter
Board Supporter
Posts: 2991
Joined: Sun May 18, 2008 7:26 pm
Location: Portage Michigan

Post by evilone »

Kenny, where in southern Michigan do you live?
Post Reply