Best rollers for a stock bike?

Dac · Post by **Dac** » Sun Jul 06, 2008 8:12 pm

my friend just picked up a 1998 elite today.
i cleaned the carb, made sure the reeds where good. its got good compression. all the typical stuff. It runs good, fires right up, great take off, tops out at about 35-36.

The take off is a little choppy, so im thinking the rollers have some flat spots.
I got allot of different roller weights. before i jump into it i was wondering, what rollers work the best for all of you?

Kenny_McCormic · Post by **Kenny_McCormic** » Sun Jul 06, 2008 9:09 pm

I would think stock weight.

happyman · Post by **happyman** » Tue Jul 08, 2008 3:04 pm

i think the 9 g rollers are the stockers and they seemed to do pretty well. a good balance of top speed and aceleration

Dac wrote:my friend just picked up a 1998 elite today.
i cleaned the carb, made sure the reeds where good. its got good compression. all the typical stuff. It runs good, fires right up, great take off, tops out at about 35-36.

The take off is a little choppy, so im thinking the rollers have some flat spots.
I got allot of different roller weights. before i jump into it i was wondering, what rollers work the best for all of you?

nparks · Post by **nparks** » Tue Jul 08, 2008 3:44 pm

This roller would work right?

happyman · Post by **happyman** » Tue Jul 08, 2008 7:53 pm

in the right hands

nparks wrote:

This roller would work right?

THE 72 · Post by **THE 72** » Wed Jul 09, 2008 4:51 am

maybe 7s and 8s

burnt_toast · Post by **burnt_toast** » Thu Jul 10, 2008 12:01 am

THE 72 wrote:maybe 7s and 8s

thats what I would try personally, slightly lighter is always best for stock to lightly modded.

Honda Spree and Elite 50 Forums

Best rollers for a stock bike?

Best rollers for a stock bike?

Re: Best rollers for a stock bike?