Big thanks to James (ubcnme)

Karman · Post by **Karman** » Wed Jul 23, 2008 10:53 pm

James responded to my post about his vented clutch cover in the pictures thread and offered to pick one up and ship it for me at cost. It came in today. Thanks James!

I could have really used it yesterday. I was caught in a big time thunderstorm on my way home from work. Hit two big puddles and my exposed clutch got soaked and spun free after losing grip from all the water. Not fun.

Dac · Post by **Dac** » Wed Jul 23, 2008 10:59 pm

i want it

justinnielsen01 · Post by **justinnielsen01** » Wed Jul 23, 2008 11:00 pm

nice how much

Kenny_McCormic · Post by **Kenny_McCormic** » Thu Jul 24, 2008 12:31 am

You could do that with the stock cover and a mill.

Dac · Post by **Dac** » Thu Jul 24, 2008 1:00 am

Kenny_McCormic wrote:You could do that with the stock cover and a mill.

you wanna do mine?

i know one thing for sure, i cant do that good of a job.

Kenny_McCormic · Post by **Kenny_McCormic** » Thu Jul 24, 2008 2:38 am

Sorry, dont have a mill. If I had a cnc mill I wouldn't be on here, I would be CNCing spree CVTs and bore kits.

Karman · Post by **Karman** » Thu Jul 24, 2008 6:27 am

Kenny_McCormic wrote:You could do that with the stock cover and a mill.

I was about to go that route but I don't have access to a mill. By the time I paid a machine shop to do it, it wasn't too much more and I can hold on to my stock one.

keithw · Post by **keithw** » Thu Jul 24, 2008 9:22 am

Kenny_McCormic wrote:Sorry, dont have a mill. If I had a cnc mill I wouldn't be on here, I would be CNCing spree CVTs and bore kits.

I don't have a CNC mill but I do have a manual one. If I can ever round up pistons I will be doing Spree big bore stuff. I've bored out my spare cylinder but hit a brick wall trying to find a .5mm oversize piston. Still looking for some and also the big bore pistons.

I ordered a .5mm over piston and rings. I got the rings and a note saying the pistons were discontinued. Now I just need to find pistons to wrap the rings around.

keithw

Kenny_McCormic · Post by **Kenny_McCormic** » Thu Jul 24, 2008 11:49 am

I remember finding a site with the 5 over pistons.
http://www.babbittsonline.com/pages/par ... Honda.aspx

keithw · Post by **keithw** » Thu Jul 24, 2008 4:58 pm

Thanks, I looked and they list it as "not available". I'm just going to have to get lucky and find one on the shelf somewhere.

keithw