Variator

gobucks · Post by **gobucks** » Fri Jul 25, 2008 3:33 pm

hi, just wondering if you can tell me which of these kits would be the best
http://cgi.ebay.com/ebaymotors/KRS-SPEE ... QQtcZphoto

http://cgi.ebay.com/ebaymotors/Speed-Va ... QQtcZphoto

chevyguyjay · Post by **chevyguyjay** » Sat Jul 26, 2008 12:54 am

for what?

gobucks · Post by **gobucks** » Sat Jul 26, 2008 1:20 pm

95elite sa50

jwasciuk · Post by **jwasciuk** » Sun Jul 27, 2008 8:21 am

Im not a fan of the KRS because it uses 8 rollers, so if you want to tune it with weights you will have to buy more, and all the roller kits ive ever seen come in packs of three. The Kelly one is nice, but you will still need to buy a ramp plate as it does not come with one.

jwasciuk · Post by **jwasciuk** » Sun Jul 27, 2008 8:22 am

I would go with this one.. http://cgi.ebay.com/ebaymotors/Racing-v ... .m14.l1318
in fact I did and it gave me 10mph speed increase.

Kenny_McCormic · Post by **Kenny_McCormic** » Sun Jul 27, 2008 12:15 pm

jwasciuk wrote:I would go with this one.. http://cgi.ebay.com/ebaymotors/Racing-v ... .m14.l1318
in fact I did and it gave me 10mph speed increase.

This one looks to be of the best design.

gobucks · Post by **gobucks** » Sun Jul 27, 2008 9:58 pm

what about this one
http://cgi.ebay.com/ebaymotors/RACE-VAR ... enameZWD1V

jwasciuk · Post by **jwasciuk** » Mon Jul 28, 2008 6:49 pm

9 gram rollers seem kinda heavy, but could be ok. most people run 7's and 8's. What is the brand of the ramp plate? looks kinda generic.

Kenny_McCormic · Post by **Kenny_McCormic** » Mon Jul 28, 2008 6:53 pm

9 is stock.

Dac · Post by **Dac** » Mon Jul 28, 2008 7:28 pm

i believe stock is like 7.5 but 9grams is good for a stock bike.