Elite mods

gobucks · Post by **gobucks** » Mon Jul 28, 2008 4:13 pm

i have a 95 elite sa50 that is still stock, i was wondering what i should do to get it going faster, presently it only goes about 30 mph.

Base4life · Post by **Base4life** » Mon Jul 28, 2008 4:17 pm

I think the way to go is to get a new high speed varriator. Something like this.

http://cgi.ebay.com/ebaymotors/KRS-SPEE ... .m20.l1116

Elite1998 · Post by **Elite1998** » Mon Jul 28, 2008 5:44 pm

Don't get the eight roller version..rollers come in packs of six and the six roller versions are just as good I would think.

http://cgi.ebay.com/ebaymotors/_Motorcy ... dZViewItem

there's a cheaper one if you use ebay..if you go through vtcycles(give them a call) it'll be 45-50 bucks

And 30 mph..you still have a restriction..check the exhaust where it bolts up to the motor (look for a washer like thing..if its there drill it out to near the size of the muffler neck) and the variator plate behind the variator

gobucks · Post by **gobucks** » Wed Jul 30, 2008 12:15 am

already pulled the plate and ground out the washer, decarbonized the exhaust, new rings , head gasket, base gasket, and many carb cleans.