Trying to get your Spree/Elite to run, or run better? Post your questions here.
Moderator: Moderator
mistercl
Noob
Posts: 9 Joined: Mon May 05, 2008 4:23 pm
Post
by mistercl » Fri Aug 08, 2008 3:52 pm
Hello all,
just had a quick Q...just last week my tire became flat out of no where..when i started pumping air into the tire it was around 18psi when i started to hear air leak from the place where u put the pump at....dont know what its called i guess the needle of the tire where u place the pump onto. the air leaks from the bottom of it, any help would be appriciated..thanks!
keithw
Elite
Posts: 392 Joined: Sun Apr 27, 2008 11:40 am
Location: North Las Vegas, Nevada
Post
by keithw » Fri Aug 08, 2008 4:18 pm
Sounds like you need a new tube. Sometimes they crack at the valve stem.
keithw
Honda Pal (Speed-o-scooter) JDM Spree with varator trans.
Honda Spree, 1985.
Another Honda Pal
Let's give it a try, how hard could it be?
Kenny_McCormic
CBR1000RR
Posts: 4957 Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan
Post
by Kenny_McCormic » Fri Aug 08, 2008 5:02 pm
New tube time.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
mistercl
Noob
Posts: 9 Joined: Mon May 05, 2008 4:23 pm
Post
by mistercl » Sat Aug 09, 2008 12:51 am
where can i find a cheap tube at?
Kenny_McCormic
CBR1000RR
Posts: 4957 Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan
Post
by Kenny_McCormic » Sat Aug 09, 2008 12:51 pm
Dirt bike store.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.