84 spree will not start

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
greenninja37
BMX
BMX
Posts: 22
Joined: Tue Jul 22, 2008 2:22 am
Location: waterford

84 spree will not start

Post by greenninja37 »

Well i just got done cleanin the carb all out and i also had a little junk in the petcock,,,, It still willnt start, it was runnin great a few weeks ago and now it willnt start, and i do not know the reason.......

also when i pull off the main fuel line going to the carb,, should gas be steadily leaking out or no? because none comes out when i pull it off.


Thanks!!!
New to the moped scene.
Proudly riding a White 84 Spree
User avatar
Clivester
Elite
Elite
Posts: 546
Joined: Fri May 30, 2008 3:10 pm
Location: Seattle, WA

Post by Clivester »

There should be no fuel coming out when the engine is not turning over. That's how the vacuum petcock works. Now you need to pull off the other tube going to the petcock (goes from carb manifold to the lower connector on the petcock) and pull a vacuum on it. With suction on that tube you should get a good flow of gas. Also, make sure you have hooked up those 2 tubes correctly.

Clive.
Lambretta TV-175 (wish I'd never sold it!)
2005 Vento Phantom R4i 125cc (stolen)
1986 Yamaha XC180 Riva
1985 Honda CH150D Elite
1988 Honda SA50 LX Elite
1989 Honda SB50
2007 iScooter 150cc
2006 Roketa 150cc
2006 TNG Venice 50cc
greenninja37
BMX
BMX
Posts: 22
Joined: Tue Jul 22, 2008 2:22 am
Location: waterford

Post by greenninja37 »

ahhhh yes i sucked on the vacuum tube and gas came out the main line.....im going to get a new plug and hopefully then it will start up
New to the moped scene.
Proudly riding a White 84 Spree
Post Reply