Roller Weights

jdemar · Post by **jdemar** » Fri Sep 19, 2008 2:39 pm

I got a new pully, does any one know what size weights come with it? Dont know the brand but came in a red/green/white cardboard backing for the packaging (off ebay). Also what size are the stock weights? And were can I buy an assortment of them to mess with, Honda dealer?

burnt_toast · Post by **burnt_toast** » Fri Sep 19, 2008 10:06 pm

honda dealer wont have weights.

try vtcycles for weight pack, or daywot on ebay.

you have bought a "keli" variator, weights included are probably 7-8g

invest in this if you'd like to tune properly:
http://www.harborfreight.com/cpi/ctaf/d ... mber=93543

DorkoElite303 · Post by **DorkoElite303** » Sat Sep 20, 2008 7:28 pm

burnt_toast wrote:honda dealer wont have weights.

try vtcycles for weight pack, or daywot on ebay.

you have bought a "keli" variator, weights included are probably 7-8g

invest in this if you'd like to tune properly:
http://www.harborfreight.com/cpi/ctaf/d ... mber=93543

Or if your planning on doing some drug dealing!

Boost_Junkiee · Post by **Boost_Junkiee** » Sat Sep 20, 2008 8:04 pm

DorkoElite303 wrote:
burnt_toast wrote:honda dealer wont have weights.

try vtcycles for weight pack, or daywot on ebay.

you have bought a "keli" variator, weights included are probably 7-8g

invest in this if you'd like to tune properly:
http://www.harborfreight.com/cpi/ctaf/d ... mber=93543
Or if your planning on doing some drug dealing!

I was just thinking, hey I can finally use my digi for something else!

tru72 · Post by **tru72** » Thu Sep 25, 2008 2:55 am

lol when i buss mines out, thats exactly what people ask me,,,LOL
aloha
D

DorkoElite303 · Post by **DorkoElite303** » Thu Sep 25, 2008 3:18 am

I guess its the true meaning of dealing weight. *rim shot*

resistanceisfutile · Post by **resistanceisfutile** » Thu Sep 25, 2008 10:51 am

stupid question here, how much do the stock rollers weigh?

wilsoniya · Post by **wilsoniya** » Thu Sep 25, 2008 4:07 pm

resistanceisfutile wrote:stupid question here, how much do the stock rollers weigh?

I think the stock weights are 8g. I could be wrong though. FWIW I bought an OKO vari from VT and I measured the included weights at 9g.

resistanceisfutile · Post by **resistanceisfutile** » Fri Sep 26, 2008 3:18 pm

do you happen to know the dimensions of the rollers? I know the ones that go in a ruckus are 16mmX13mm and I have a few of em' laying around, was wondering if I could try them in an elite.

happyman · Post by **happyman** » Mon Sep 29, 2008 10:54 pm

thats the size you need

quote="resistanceisfutile"]do you happen to know the dimensions of the rollers? I know the ones that go in a ruckus are 16mmX13mm and I have a few of em' laying around, was wondering if I could try them in an elite.[/quote]

happyman · Post by **happyman** » Mon Sep 29, 2008 10:59 pm

can you list the complete build? that helps give you a good idea what weight rollers you need

jdemar wrote:I got a new pully, does any one know what size weights come with it? Dont know the brand but came in a red/green/white cardboard backing for the packaging (off ebay). Also what size are the stock weights? And were can I buy an assortment of them to mess with, Honda dealer?

maddog · Post by **maddog** » Tue Sep 30, 2008 12:37 am

Daytona weights with factory honda weights will last up to 1.5 yrs.

jdemar · Post by **jdemar** » Thu Oct 02, 2008 11:48 pm

The only thing I have done is the pully, belt and clutch springs...

happyman wrote:can you list the complete build? that helps give you a good idea what weight rollers you need

jdemar wrote:I got a new pully, does any one know what size weights come with it? Dont know the brand but came in a red/green/white cardboard backing for the packaging (off ebay). Also what size are the stock weights? And were can I buy an assortment of them to mess with, Honda dealer?

Honda Spree and Elite 50 Forums

Roller Weights

Roller Weights

Re: Roller Weights

Re: Roller Weights