restrictor

spreefreak · Post by **spreefreak** » Sat Aug 13, 2005 10:25 pm

if i remove the restrictor inside the muffler of my Iowa Spree would i have to chane the jets.
do any of you have step by step instructions to do so

Tippmann98 · Post by **Tippmann98** » Sun Aug 14, 2005 1:30 am

you should be fine. The iowa model is just highly restricted because of iowa's standards.. i have heard of people just ripping them out or replacing the muffler. you should be fine....

spreefreak · Post by **spreefreak** » Sun Aug 14, 2005 10:02 am

thank you any more suggestions

Tippmann98 · Post by **Tippmann98** » Mon Aug 15, 2005 6:19 pm

i would check the exhaughst port while you have the muffler off. i dont know if that restrictor would do anything or not. But my friends spree sure does get nasty even without one.

vette76 · Post by **vette76** » Mon Aug 15, 2005 8:52 pm

i would think it would pack with carbon easier because it is only like a 1/4" hole compared to the 1" on non-iowa models.

spreefreak · Post by **spreefreak** » Mon Aug 15, 2005 10:39 pm

great, and tippmann98 what do you mean by "nasty"?

vette76 · Post by **vette76** » Tue Aug 16, 2005 2:20 am

he meant carbon. thats what i was talking about.

spreefreak · Post by **spreefreak** » Tue Aug 16, 2005 7:08 pm

now i understand