??? disconect red wire on cdi??? nq50

Kenny_McCormic · Post by **Kenny_McCormic** » Sat Dec 20, 2008 12:34 pm

Everybody needs to quit their * and get the f*** along.

Bear45-70 · Post by **Bear45-70** » Sat Dec 20, 2008 2:32 pm

OK, due to being house bound for a week and a half due to the frickin' snow, I appear to be loosing it. Timcat, I apologize. I misread your post and overreacted. But we only do this heavy snow crap every 20 years or so and it just isn't easy anymore. They plowed my road yesterday and it dumped 2 more last night with 5 for today is forecast and 13 more for tonight. And it is suppose to last past Christmas. Again, I apologize.

jstone · Post by **jstone** » Sun Dec 21, 2008 1:56 am

After that whole thread with burnt_toast, I lost alot of respect for you bear, but you just gained alot of it back IMO (not that you care, and I can't say I don't blame you lol). Not many people can say they're sorry like that, especially not on the internet.

And why don't you send some of that snow down this way? I love the stuff and we haven't had anything but a half inch of ice so far.

Bear45-70 · Post by **Bear45-70** » Sun Dec 21, 2008 2:12 am

I would send all this snow your way if I could. We had another 6" today and suppose to have at least another 6" tomorrow and then 6" more tomorrow night. I did get the quad started today The 3 year old battery wasn't up to cranking it in 20├é┬░ weather. So I can get out if I have to as long it doesn't get deeper than 18". The wife just measured the snow, 12 1/2" and it is still snowing.

timcat · Post by **timcat** » Sun Dec 21, 2008 3:38 am

we dont have to do nothing he started it ill end it by saying i came here for friends and to learn bear is starting to remind me of the drunk guy down the street that broke my puch moped i have been working on mopeds for 16 yrs i knew a guy that restored army bikes from ww2 from scrap to mint condition may he rest in peace he has passed and he was a ww2 vet he had about 100 bikes of all kinds so hanging out with him i learned about all kinds of bikes of the which id like to get my hands on a fa50 i know its not honda but id like to own one im into bikes enough to try to start a shop out of my house this guy i knew inspired me in a way he had things people would have cream dreams over me and him once restored a harley davidson mini bike when i was like 15 yes they made them when they almost went out of buisnes at one time this is not somthing that most people know about but yes they almost went out of buisness i have worked on itialia jet vespa original vespa i think they were 125 cc but im not an expert im still learning but bear is an expert thats for certian

ALOW1 · Post by **ALOW1** » Sun Dec 21, 2008 4:55 am

timcat wrote:people would have cream dreams over me and him

Bear45-70 · Post by **Bear45-70** » Sun Dec 21, 2008 12:05 pm

ALOW1 wrote:
timcat wrote:people would have cream dreams over me and him

It's the beer fantasy talking. He's probably a

to boot.

Kenny_McCormic · Post by **Kenny_McCormic** » Sun Dec 21, 2008 12:09 pm

Bear I can kinda feel for ya about the snow, we only have maybe a foot here but I haven't seen a clean road in 3 days. Even if my dirt bike ran good enough to run more than a few minutes its beyond up to the axles and barely moves in this much snow.

Bear45-70 · Post by **Bear45-70** » Sun Dec 21, 2008 12:13 pm

The bad part here is that we now have 14" and it is still snowing. The county just does own that much snow removal gear and is not set up to handle this much snow.

Bear45-70 · Post by **Bear45-70** » Sun Dec 21, 2008 12:15 pm

timcat wrote:we dont have to do nothing he started it ill end it by saying i came here for friends and to learn bear is starting to remind me of the drunk guy down the street that broke my puch moped i have been working on mopeds for 16 yrs i knew a guy that restored army bikes from ww2 from scrap to mint condition may he rest in peace he has passed and he was a ww2 vet he had about 100 bikes of all kinds so hanging out with him i learned about all kinds of bikes of the which id like to get my hands on a fa50 i know its not honda but id like to own one im into bikes enough to try to start a shop out of my house this guy i knew inspired me in a way he had things people would have cream dreams over me and him once restored a harley davidson mini bike when i was like 15 yes they made them when they almost went out of buisnes at one time this is not somthing that most people know about but yes they almost went out of buisness i have worked on itialia jet vespa original vespa i think they were 125 cc but im not an expert im still learning but bear is an expert thats for certian

If you want an enemy, you are going about it the right way. Either back off or I will make your life here a living *. I don't apologize all that often and you are the reason why.

Post by **noiseguy** » Sun Dec 21, 2008 3:07 pm

Telling someone to disconnect the red wire is like sending the new guy to fetch a skyhook.

* would you go on Mopedarmy looking for Spree stuff, anyway? They're all about 2-strokes, but they hate scooters. Unless you want to talk about how to tune a 2-stroke motor in technical terms: expansion pipes, porting, etc you won't find many ppl able to help.

Post by **noiseguy** » Sun Dec 21, 2008 3:10 pm

Bear45-70 wrote: Either back off or I will make your life here a living *.

You've apparently never seen Flint, MI

You don't need to make his life a living *; he's already there.

Bear45-70 · Post by **Bear45-70** » Sun Dec 21, 2008 4:30 pm

noiseguy wrote:
Bear45-70 wrote: Either back off or I will make your life here a living *.
You've apparently never seen Flint, MI

You don't need to make his life a living *; he's already there.

Actually I have been there. The wife was born in Benton Harbor and grew up in Battle Creek and there are a number of relatives all over southern Michigan, including the mother-in-law from *.

Dac · Post by **Dac** » Sun Dec 21, 2008 8:20 pm

Benton Harbor???
i live right by there. I moped there time to time.

timcat · Post by **timcat** » Sun Dec 21, 2008 8:29 pm

i think im gonna bring my other spree in the house take some pics and do some working on it im done with the 84 im about to start working on the 85 tonight the 85 is an all new project ill take pics as i do i already cleaned the carb out over the past few days. so ill be seeing how it goes i hope to make it as nice as the 84 but ill maby post some things for people to read that shows dissambaly of top end and other things