pocket bike pipe mod with no welds

Kenny_McCormic · Post by **Kenny_McCormic** » Sat Jan 10, 2009 6:17 pm

Clivester wrote:I notice the pics don't show a mounting bracket to support the main weight of the pipe. I hope you plan to fabricate one , because without it there's a pretty good chance the resulting vibration will either loosen the exhaust manifold nuts or maybe even shear the studs off.

It'll b interesting to see the results of the "derestricted" silencer.

By the way, where was the black pipe from - was that the one listed on eBay?

Clive.

Thats assuming it doesn't break the jug.

timcat · Post by **timcat** » Sat Jan 10, 2009 6:21 pm

im gonna make a mount as soon as i can get to my friends black smith shop i should list his email if you can put it on paper he can make it

jstone · Post by **jstone** » Sun Jan 11, 2009 2:53 am

I think that your "restrictions" aren't really restrictions. The fiber is just packing that is in almost any pipe, its what dulls the sound. Some pipes need to be re-packed after so much use. The other thing just looks like a spark arrestor, which is required on must vehicles.

timcat · Post by **timcat** » Sun Jan 11, 2009 2:57 am

oh ok makes sense sounds like a dirt bike now lol i like it loud and my neighbors dont care

z50r-ghost · Post by **z50r-ghost** » Thu Jan 15, 2009 12:15 am

timcat,

dude, that looks really freaking sweet! nice work, thanks for sharing. definitely go with having it welded...
please post when you get to do some carb tuning. im guessing it should really help out your performance.

j

timcat · Post by **timcat** » Thu Jan 15, 2009 1:26 am

as soon as i find some jets will any one donate any old ones to me i need 68 70 and 72 for a start i cant post any thing new till i can do some testing and i cant do any testing with out these . im on socialsecurity disability i only get 670 a month and my rent is 550 not including bills . getting the gf to buy the pipe was hard enough shes not willing to get any thing else she thinks its a waste of time . girls just dont understand scooters i guess but please some one donate the jets i need so i can report back to doing this mod and others and posting results i dont work so i have lots of time to do stuff and post it but i know better than to run this more than 5 min with out up jetting so im stuck please help me out with getting back to doing this .

Kenny_McCormic · Post by **Kenny_McCormic** » Thu Jan 15, 2009 12:11 pm

Jets are cheap!

timcat · Post by **timcat** » Thu Jan 15, 2009 12:34 pm

if there cheap maby some one will help me out here .

Wheelman-111 · Post by **Wheelman-111** » Thu Jan 15, 2009 1:25 pm

Greetings:

Here is a source for jets.

http://www.motorcyclecarbs.com/Keihin_A ... F5_C79.cfm

I have not personally verified that they fit in the Express/Pal/Gyro/Spree/Aero/Vision/Elite/Dio carburetors. If anyone can tell me the size of the Polini Contesta Kit main jet, I will order a couple in larger sizes to test.

This site should be made Forum-accessible for anyone tuning a scoot.

timcat · Post by **timcat** » Thu Jan 15, 2009 5:03 pm

thats an awsome site if i dont find some one to trade stuff with i may just order from there

Honda Spree and Elite 50 Forums

pocket bike pipe mod with no welds

T-T-T-Timmy and the Jets