starter question

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
deathwish
Spree
Spree
Posts: 237
Joined: Mon Jul 23, 1973 10:24 am
Location: mtl, can

starter question

Post by deathwish »

im not to worried abut it but every time i try to start it it sounds like it misses and i have to stop and push it again :? .......is this a seriuos problem or does anyone else get the same thing???
User avatar
MySpree
CBR1000RR
CBR1000RR
Posts: 3291
Joined: Mon Jul 23, 1973 10:24 am
Location: Troy michigan
Contact:

Post by MySpree »

never had the prob. :D
Image
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

try plug change. my problem ended up to be a coil wire. unscrew boot and cut 1/4 in off. screw boot back on.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
User avatar
deathwish
Spree
Spree
Posts: 237
Joined: Mon Jul 23, 1973 10:24 am
Location: mtl, can

Post by deathwish »

does this affect anything else???
User avatar
vette76
CB900F
CB900F
Posts: 1830
Joined: Sat Jul 31, 2004 8:00 pm
Location: rhode island

Post by vette76 »

what?

if u mean the coil wire, no. i am saying this because the wire inside could be corroded/worn. by cutting 1/4 off u will solve this problem.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
User avatar
deathwish
Spree
Spree
Posts: 237
Joined: Mon Jul 23, 1973 10:24 am
Location: mtl, can

Post by deathwish »

i'll rite im gonna give it a try
User avatar
Justinsane
Spree
Spree
Posts: 281
Joined: Mon Jul 23, 1973 10:24 am
Location: Oshkosh, Wisconsin

Post by Justinsane »

if you are giving it gas while your trying to start it... dont. try giving throttle, then let off, then try to start, i had this similar problem which eventually led to a weak battery, so now i have to jump it time and time again...
General Spree
User avatar
hondaman
Elite
Elite
Posts: 529
Joined: Mon Jul 23, 1973 10:24 am

Post by hondaman »

If you try all of these other suggestions and it still does the same thing it just might be your starter pinion gear is getting worn down. The only way to check that is by removing your belt cover and you will see it.
Try all the other suggestions before you attempt this though.
Post Reply