1986 Spree * Sputter...

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
dr.ona
Spree
Spree
Posts: 233
Joined: Tue Sep 18, 2007 3:55 pm

1986 Spree * Sputter...

Post by dr.ona »

Hey All,
It's been awhile since I've posted here but I visit every so often to see how things are going.
The good news is that all my Sprees are running great!
Except I do have one of them that has an unusual symptom.

It's a 1986 Iowa model.
I've had it up to 30 mph last year with no problems
This year though, it kinda acts like a sputter/* when it gets to about 26 mph if given a full throttle all at once. If you back off on the throttle a little bit and then slowly give it full throttle again, it will get up to about 30 mph.
So...a full throttle gets you upto 26mph with sputtering/*.
Back off on it, and give it gas again and it gets to 30 mph.

I've done the following but nothing has helped.
New spark plug.
New fuel in tank.
Cleaned out exaust.
Did compression check ( 115 psi )

Does this sound like a clean the carb fix?


Thanks!
Robert
"I can't drive......35!"
User avatar
noiseguy
Site Admin
Site Admin
Posts: 4379
Joined: Sat Jul 31, 2004 8:00 pm
Location: South Florida
Contact:

Re: 1986 Spree * Sputter...

Post by noiseguy »

Sounds like a carb cleaning is in order; mine do that kind of stuff out of storage sometimes. Should be a fast job with some carb spray if it's still running.

You can play with the needle height as well, raising it, which may help a bit.
Admin, Hondaspree.net

Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
User avatar
hondaman
Elite
Elite
Posts: 529
Joined: Mon Jul 23, 1973 10:24 am

Re: 1986 Spree * Sputter...

Post by hondaman »

Do you have an inline fuel filter installed between the vacuum valve and the carburetor? If not you should do so. It is a little added protection against dirt entering the carb.
User avatar
Wheelman-111
Moderator
Moderator
Posts: 10683
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: 1986 Spree * Sputter...

Post by Wheelman-111 »

Greetings:

If it's been running and getting fresh gasoline frequently, the carb is less likely the problem, (although we know the Sprees' tendency for SCO.*) particularly since it's a high-speed/WOT issue.

:imo:

Depending on miles ridden, consider the possibility of the air filter becoming dirty and creating a rich mixture. I believe 4-stroking at WOT is more consistent with that possibility. Never hurts to check the various orificia for wildlife, either. Birds, Bees, Mice, Wasps, Spreeders... :surprise: Oh My!

*Spontaneous Carb Obstruction
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9242
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: 1986 Spree * Sputter...

Post by Bear45-70 »

Yeah, what wheelman said. Oh and 30 mph from a 25 mph Iowa Spree pretty much means someone derestricted it already. I doubt the issue is a leak from the vent as he said it idles fine. Make sure the drain screw isn't still cracked open a bit as would be done for putting the scooter up for the winter.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
dr.ona
Spree
Spree
Posts: 233
Joined: Tue Sep 18, 2007 3:55 pm

Re: 1986 Spree * Sputter...

Post by dr.ona »

Great advice. I changed out the air filter and I'll give it a ride tonight. I don't have a inline fuel filter on the Sprees.
If it's still acting funny, I'll do the carb rebuild.

Thanks again!
~Robert
"I can't drive......35!"
mopar4u
Spree
Spree
Posts: 118
Joined: Sun Sep 20, 2009 10:54 am

Re: 1986 Spree * Sputter...

Post by mopar4u »

Have you messed with the air screw? I know I had my air screw too many turns out and I got a * take off. Put my air screw at about 1 turn out and problem solved.
User avatar
bradthreee
Board Supporter
Board Supporter
Posts: 1922
Joined: Tue Sep 12, 2006 4:20 pm
Location: MARS...

Re: 1986 Spree * Sputter...

Post by bradthreee »

One more note:

Also make sure that you are not having any air leaks from the airbox.

I would inspect the air intake hose for cracks, the airbox lid seal, and the carb insulator(the brown peice between the carb and the intake mani) gaskets.

Party on Wayne :rock:
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9242
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: 1986 Spree * Sputter...

Post by Bear45-70 »

mopar4u wrote:Have you messed with the air screw? I know I had my air screw too many turns out and I got a * take off. Put my air screw at about 1 turn out and problem solved.
Air screw for '86 Spree is 1 3/8 turns.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Post Reply