I need some advice for my spree

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
1987 Honda spree
Noob
Noob
Posts: 8
Joined: Tue Nov 10, 2009 9:52 pm

I need some advice for my spree

Post by 1987 Honda spree »

Ok so on my 1987 Honda spree I'm going to put an 85cc 2stroke dirt bike pipe on it expansion chamber and all will it work be sum advice
portable
BMX
BMX
Posts: 35
Joined: Thu Oct 08, 2009 10:55 pm
Location: barrington il. 60010

Re: I need some advice for my spree

Post by portable »

heap bigum trouble kemosabi, cant tell what smoke signals say! :shock:
User avatar
Wheelman-111
Moderator
Moderator
Posts: 10683
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: I need some advice for my spree

Post by Wheelman-111 »

Greetings

Methinks it will run, perhaps just not all that well. If you're just replacing a rusted-out stocker, it may be worth doing just because it's handy and paid-for. If you seek performance gains, you will need to do a bit more reading. Unless you have already adapted the header to the M/C chamber, it'd probably be easier and a whole lot less work simply to locate a nicer/newer stock pipe. The Elite ES pipes should fit and are reportedly an upgrade for the Spree pipes. They turn up frequently on eBay and here.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Post Reply