Re: honda dio prob
Posted: Sat Aug 08, 2009 12:39 pm
Greetings:
Sorry if I wasn't clear. Very hard to give specific advice via Forum, but here goes:
Reinstall stock tranny pulley and belt for now. Keep 6&7s but add +1.5 clutch grab springs.
Check plug color. If dark, jet down to ~85.
Test.
Once you get that going right, you can experiment with ZX pulley again.
Sorry if I wasn't clear. Very hard to give specific advice via Forum, but here goes:
Reinstall stock tranny pulley and belt for now. Keep 6&7s but add +1.5 clutch grab springs.
Check plug color. If dark, jet down to ~85.
Test.
Once you get that going right, you can experiment with ZX pulley again.