Page 2 of 2
Re: Wheel help
Posted: Tue Aug 11, 2009 2:56 am
by oliveskate
:S:S
Thanks for the help though, but I did a red neck job on it, and see how it work's tomorrow. Once my mom come's back from vacation, I'll ask her to ask her welding friend to see if she can help.
Re: Wheel help
Posted: Tue Aug 11, 2009 4:55 pm
by oliveskate
One problem though. Since a bolt is missing, there's more air flow, so it make's it a little slower. I use to be able to go 60km +
What so I do?
Thanks
Re: Wheel help
Posted: Tue Aug 11, 2009 6:17 pm
by Wheelman-111
Greetings
Don't run it with a loose exhaust flange. At all.
Re: Wheel help
Posted: Tue Aug 11, 2009 7:26 pm
by oliveskate
So what should I do??
Re: Wheel help
Posted: Tue Aug 11, 2009 10:24 pm
by Wheelman-111
Greetings:
Have the stud removed or the threads re-drilled and tapped by someone who''s got a lot of experience with this stuff, AND the correct workshop tools. Do not try this at home, or you may make it so the cylinder is unrecoverable. Ride the Schwinn until the scooter's fixed correctly. It's better for your Cardiovascular system anyway.
Re: Wheel help
Posted: Wed Aug 12, 2009 11:46 pm
by oliveskate
Wheelman-111 wrote:Greetings:
Have the stud removed or the threads re-drilled and tapped by someone who''s got a lot of experience with this stuff, AND the correct workshop tools. Do not try this at home, or you may make it so the cylinder is unrecoverable. Ride the Schwinn until the scooter's fixed correctly. It's better for your Cardiovascular system anyway.
Ok I might look into it. The scooter is going to be parked in the garage for a while though, until I can find somebody who can help me