Page 2 of 2
Re: New Pics of my Aero 50 *CorSa miNi StroKer* L00k!!
Posted: Sat Sep 18, 2010 11:46 pm
by toad772
S4Patrick wrote:Turtle, yes, get a longer shock.....get a 285mm-300mm Not only will it help with your exhaust clearance issues, but it transforms (for the better) they was the Aero handles....~!
I'm running a Daytona 310mm and love it. Center kickstand still works, but I have a side stand mounted that works well.
Post up some pics of your Aero ~!
Regards,
Patrick
Where can I get the 310mm?
Re: New Pics of my Aero 50 *CorSa miNi StroKer* L00k!!
Posted: Sun Sep 19, 2010 1:47 pm
by S4Patrick
Turtle, call the guys in Hawaii, they will tell you they have up to 270mm, you'll have to ask them to special order one, get a 300mm, as the 310 is tad bit too much,but still works. Seems like you may have to convince them to do this for you and you'll more than likely have to prepay for it.
Re: New Pics of my Aero 50 *CorSa miNi StroKer* L00k!!
Posted: Sun Sep 19, 2010 7:46 pm
by Johnny5
Those panels are soooo minty! I would make a special pedestal just to show it off in my house. That is where you keep, right?
Re: New Pics of my Aero 50 *CorSa miNi StroKer* L00k!!
Posted: Sun Sep 19, 2010 8:13 pm
by z50r-ghost
Johnny5,
Yep dude, my Aero sits in our living room during the winter months, but in the summer it stays in the garage. i actually ride my Aero alot! Angie and I ride (our scooters) almost every night. We are not looking forward to the cold months...
Turtle,
The longer Daytona shock keeps the SEF pipe from hitting the bodywork. As well, I have the coil adjustment turned all the way up (tightened) to keep it stiff. -The Okumura pipe I had DID get a little close to the body panel, but after turning the adjustment all the way tight, it kept the pipe away from hitting.
S4Patrick,
The sidestand on my Aero is made by Daytona of Japan, and it is a direct, no-mod bolt on. Forum member " elite_dub " (aka Jay) picked it out & bought it for me in Hawaii and sent it to me. It took all of 15 minutes to install, and it is a freaking hardcore-made part! It IS kinda expensive; it cost me around $90, but well worth it. I think it looks so much better than the centerstand, it's much more stable (I have 90-90-10's so my Aero sits up higher), and the stand looks sweet, too!
Contact elite_dub if you need help sourcing the stand,or if you need a part number for the stand PM me.
I cannot wait to check out all your builds, Patrick- please post up pics soon!
Thanks again for all the compliments, guys- they mean alot.
Re: New Pics of my Aero 50 *CorSa miNi StroKer* L00k!!
Posted: Mon Sep 20, 2010 11:09 pm
by Epschoenly
I run savas on my moped, definitely nice stuff, would be great to live somewhere slicks would be safe.
Re: New Pics of my Aero 50 *CorSa miNi StroKer* L00k!!
Posted: Tue Sep 21, 2010 8:34 pm
by z50r-ghost
Yeah, my Aero never sees rain or wet streets!
I love the Sava slicks; especially the way they look. Most people see them, and say "man you have some bald a** tires!!
later, jon
Re: New Pics of my Aero 50 *CorSa miNi StroKer* L00k!!
Posted: Thu Sep 23, 2010 6:16 pm
by maddog
yep, just as clean as mine
