Re: Rims and sizes
Posted: Mon Oct 11, 2010 10:19 am
Greetings:
Someone should verify, but I'm almost certain the '87 Aero rims were 1.85s. ??
Someone should verify, but I'm almost certain the '87 Aero rims were 1.85s. ??
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://hondaspree.net/hondaspree.net/phpBB3/
Rims and sizes
http://hondaspree.net/hondaspree.net/phpBB3/viewtopic.php?t=12844
Page 2 of 2
Re: Rims and sizes
Posted: Mon Oct 11, 2010 10:47 am
I know my se50 came with 1.85x10 tube type rims. Maybe it is a paint code difference for the part numbers. I think the Aero has a little darker rim although it has been a while since I matched them side by side.
Re: Rims and sizes
Posted: Mon Oct 11, 2010 12:52 pm
I just verified that the Ruckus rim is 10x3.00.
Hey Mouse would it be possible to add columns for TG50 and NN50 Gyros?
Hey Mouse would it be possible to add columns for TG50 and NN50 Gyros?
Re: Rims and sizes
Posted: Mon Oct 11, 2010 4:38 pm
You are right B3. I double checked during lunch and realized that I was thinking about the shipping dimensionsbradthreee wrote:I just verified that the Ruckus rim is 10x3.00.
Hey Mouse would it be possible to add columns for TG50 and NN50 Gyros?
Re: Rims and sizes
Posted: Mon Oct 11, 2010 9:21 pm
Front rim part number for the '85-'87 Aero {44650-GR2-000ZA} is shared with the '83-'84 Aero and '84 NN50 Gyro. My '87 Aero had 1.5" rims front/back. Bradthree has a 1.5 on his '84 Aero, and the NN50's are 1.5".Wheelman-111 wrote:Someone should verify, but I'm almost certain the '87 Aero rims were 1.85s. ??
Was there a 'Flash" with 1.5 rims too? http://www.hondaspree.net/phpBB3/viewto ... &hilit=rim
--
All - thanks for the check on the table, Ruckus wheel. Will get Gyro info added.
Re: Rims and sizes
Posted: Thu Oct 14, 2010 7:41 pm
Can you run 2.5"x10.0" inch tubes with 2.75"x10.0" tires?
Re: Rims and sizes
Posted: Thu Oct 14, 2010 9:13 pm
The last set of IRC tubes I had said they were for both 2.50/2.75 tire sizessanjuro wrote:Can you run 2.5"x10.0" inch tubes with 2.75"x10.0" tires?
Re: Rims and sizes
Posted: Thu Oct 14, 2010 9:31 pm
Awesome.
Re: Rims and sizes
Posted: Sun Nov 14, 2010 1:37 pm
We can now add Ruckus rims to fit. This one is a dio style rim for Ruckus that is 3.00 wide. Clearance is tight but works great none the less. Motor is from an 84 Aero and the tire I'm using is a 90/90 IRC.
Take notice of the washers needed to space out the muffler for the larger 3.00" rim.
Take notice of the washers needed to space out the muffler for the larger 3.00" rim.
Re: Rims and sizes
Posted: Sun Nov 14, 2010 2:52 pm
How's the pipe fitment with the washers? Watch for cracking around your mounting flanges
Re: Rims and sizes
Posted: Sun Nov 14, 2010 9:22 pm
The stock muffler fitment is pretty tight. I used 4 washers between the exhaust mount and the engine block. I didnt have to bang anything into place but it definetely took a little more effort than stock.808BMW wrote:How's the pipe fitment with the washers? Watch for cracking around your mounting flanges