Honda Spree and Elite 50 Forums

maddog wrote:dumb * bear= knows nothing abort scoots

Oh d*** thats funny

Yeah i literally used a syringe with a needle on the end of it to suck up oil and get it inside the sheath. It didn't come out the other end so then i did the same thing with industrial degreaser. No luck still. Calling and ordering a new cable from honda today

since i have successfully done this before I'll tell you how i did it

i put the red straw up along side of the cable, sprayed and used the pressure of the can to squirt oil down the hole until it came out of the other end. sometimes u have to squirt it down both ends..however, we all agree you should get a new cable because of the corrosion.

campusman wrote:since i have successfully done this before I'll tell you how i did it

i put the red straw up along side of the cable, sprayed and used the pressure of the can to squirt oil down the hole until it came out of the other end. sometimes u have to squirt it down both ends..however, we all agree you should get a new cable because of the corrosion.

You only prove that your are a moron for doing so and your life means nothing to you. And from 25 years of working with corroded cables, you are a liar too.

let him try again with the my info and we will see who is right

campusman wrote:let him try again with the my info and we will see who is right

You claim you know nothing about scooter, but you insist on telling people how to do thing, no matter how dangerous it is to their health and well being. You really are a liar and a moron.

You beat me to that one. He admits that he knows nothing about scooters yet he posts advice on almost every topic

yeah i do insist on telling people how to do things because this worked for me

unlike you, oh i think its 1 of 4 things

konaking wrote:You beat me to that one. He admits that he knows nothing about scooters yet he posts advice on almost every topic

knows nothing??who said that??

forget about what worked for me, i'm just glad he's getting a new cable..

Got the new cable in and installed

Just waiting on the new tires from Honda coming in on tuesday and then after break i cant start in on the pulley mod.

Still designing that CT spacer out of one piece of aluminum, we'll see how that one turns out

Glad to hear that you've ordered a new cable! I've used a product called Dr. Slide for the very same symptoms that you've had with your cable and it has worked wonders. It was recommended to me from my friendly neighborhood Honda Powersports Dealer...

Petrock's 1984 Spree wrote:Got the new cable in and installed

Just waiting on the new tires from Honda coming in on tuesday and then after break i cant start in on the pulley mod.

Still designing that CT spacer out of one piece of aluminum, we'll see how that one turns out

bradthree, its PARTY TIME

Huh, ill try that if i ever run into the same problem again.