Re: 1986 Honda Aero Project
Posted: Mon Jan 09, 2012 2:15 am
You can not just remove the stock air cleaner and install an aftermarket one. You must rejet or you will lean out the motor and kill it.
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://fastfoamfilter.com/hondaspree.net/phpBB3/
1986 Honda Aero Project
http://fastfoamfilter.com/hondaspree.net/phpBB3/viewtopic.php?t=21759
Page 2 of 2
Re: 1986 Honda Aero Project
Posted: Mon Jan 09, 2012 3:00 pm
Ok thanxs guys, Where can i buy the main jets at? do they sell them at like local scooter stores? or do i get them online? ill just throw the old air box on for now until I upjet.
Re: 1986 Honda Aero Project
Posted: Mon Jan 09, 2012 3:19 pm
Honda dealer
Re: 1986 Honda Aero Project
Posted: Mon Jan 09, 2012 5:46 pm
Greetings:
My exhaustive searching failed to find any source for jets that fit the PA Series Honda-exclusive carbs. Even Keihin website and Jets R Us never heard of these things.
Honda-san likes Part Numbers: 99101-187-0**0, where the **s are the jet size. For Aero, they come in 82, 85, and 88 for use with a Pod filter. Daytona makes kits up to 105 - you can get them at DayWOT on eBay, among other sources.
My exhaustive searching failed to find any source for jets that fit the PA Series Honda-exclusive carbs. Even Keihin website and Jets R Us never heard of these things.
Honda-san likes Part Numbers: 99101-187-0**0, where the **s are the jet size. For Aero, they come in 82, 85, and 88 for use with a Pod filter. Daytona makes kits up to 105 - you can get them at DayWOT on eBay, among other sources.
Re: 1986 Honda Aero Project
Posted: Mon Jan 09, 2012 10:17 pm
I have no idea what size the main jet is. But I put the old filter back on, but now I need to readjust my carb.. For some reason I cant get it now, like it idols fine I think but once I hit higher speeds it starts to bog out.
Re: 1986 Honda Aero Project
Posted: Wed Jan 18, 2012 7:15 pm
It looks GREAT! What kind of paint did you use? How did you apply it? How did you prep the plastics before painting?
(I have an 85 Aero that could use a new paint job. Runs ok, but kinda ugly.
(I have an 85 Aero that could use a new paint job. Runs ok, but kinda ugly.
Re: 1986 Honda Aero Project
Posted: Thu Mar 08, 2012 1:06 pm
Siiic, Stealth with character = sweet ride.MrWest wrote:Yea i really wanna do a big bore kit on it change the muffler but thats like a wayy future project im just ganna clean this one up for right now and get it pretty lol
I just need to get a new seat and find some back blinkers and finish the last peice of plastic (which is in like 5 pieces from the previous owner) and im ready to go!
Took me forever but i found some high heat paint to paint the muffler with so it wasnt alll rustyy
