Page 2 of 2
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed Mar 14, 2012 8:38 am
by Downsouthdio
That deff looks like a tecnigas exhaust
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed Mar 14, 2012 12:53 pm
by scottinscotty
not soo much...
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed Mar 14, 2012 1:06 pm
by Downsouthdio
That looks kinda small for a mhr.. It looks the exact same as the tecnigas.. Bends look different to
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed Mar 14, 2012 1:36 pm
by eliteguy50
I have a Tec, that is not a Tec.
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed Mar 14, 2012 6:37 pm
by bakaracer
Downsouthdio wrote:That looks kinda small for a mhr.. It looks the exact same as the tecnigas.. Bends look different to
Bigger doesn't mean better. Malossi designed the pipe to make power at a certain rpm and also how wide the power band will be. Pipes like malossi,polini,tecnigas and any of the euro brand pipes are usually for 50-70cc cylinders so that's why the j pipe and belly is not as big as the taiwan pipes which are for 70-90cc.keep in mind that pretty much all the pipes out there is for closed circuit racing so that reflects the design also.
Re: Where can i find polini or malossi exhaust pipe?
Posted: Thu May 03, 2012 1:37 am
by dv/dt
You got me curious about that one! I wish there were more reviews for all the exhausts out there that aren't PG longs/shorts.
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed May 09, 2012 8:13 pm
by trudeau1111
you guys recommend an exhaust for Aero NB50 ? 1986 model ?
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed May 09, 2012 8:28 pm
by eliteguy50
trudeau1111 wrote:you guys recommend an exhaust for Aero NB50 ? 1986 model ?
Leo Vince sp3.
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed May 09, 2012 9:18 pm
by trudeau1111
do they make the Leo specifically for the NB50, or does it fit from something else?
Re: Where can i find polini or malossi exhaust pipe?
Posted: Wed May 09, 2012 10:45 pm
by z50r-ghost
There is Leo SP3 model specifically made for the NB50. No mods to install... Just bolt it on! (and remember to re-jet & check plug...)
You can find the NB50 SP3 pipe on European scooter sites; I'm pretty sure you will have to buy the "Vision" model with angled exhaust port (The Honda "Vision" uses an NB50-type engine in Europe) -Please correct me if I'm wrong-
-jc
Re: Where can i find polini or malossi exhaust pipe?
Posted: Thu May 10, 2012 12:19 am
by eliteguy50
Leo Vince part number 4447.