Page 2 of 2
Re: Kymco zx-50 question
Posted: Fri Jan 18, 2013 8:33 pm
by Raindrop
Re: Kymco zx-50 question
Posted: Sat Jan 19, 2013 9:15 pm
by Downsouthdio
Nah wont work. Af05e primaries will work from what i hear.
Re: Kymco zx-50 question
Posted: Fri Jan 25, 2013 8:29 pm
by Tate
Yeah stock ZX50 gears are already pretty tall.
Re: Kymco zx-50 question
Posted: Sat Jan 26, 2013 10:14 am
by LMH
Only 10.5:1, less than the af05es 10:1 ratio. Af16 is 11:1. GY6/139qmb final gear is a direct swap, and the primary shaft also. The counter is not.
Re: Kymco zx-50 question
Posted: Wed Jan 30, 2013 11:08 pm
by Trafficjamz
LoveMyHonda wrote:Only 10.5:1, less than the af05es 10:1 ratio. Af16 is 11:1. GY6/139qmb final gear is a direct swap, and the primary shaft also. The counter is not.
Stock ratio on a af16 is 12.1:1
The kymco also has a 12" tire, so that will make the overall ratio even higher.
Re: Kymco zx-50 question
Posted: Thu Jan 31, 2013 12:27 am
by LMH
oops my vague recollection thought they were 11:1, so would that mean the af05e is the 11:1? The zx50 is in between the two.
Re: Kymco zx-50 question
Posted: Sat Apr 13, 2013 4:38 am
by JJ Joseph
The Kymco is a Dio engine on a long case (12" wheel). It's geared plenty fast right out of the box with the 12" wheel. No need to do anything.