Honda Spree and Elite 50 Forums

As for my needle on the speedo it disappears don't know what that means but it feels pretty brisk.

Probably close to 50 mph

I told you this would be a good set up for what you need it for. And best off all its not loud and you dont have a bunch of parts that you dont need..
I like the stock clutch spring on this set up but everyone has personal preference when they dial it in. I am glad everything worked out and please post results after you add the clutch spring.
You can always dial the rollers in a little better for personal preference.
Taz

Seems about right because my gps said 54 mph

I will Taz! Hey by any chance did you already ship the carb out? Because if you didn't I'd like to see if we could trade it for those rear clutch torque springs or maybe something else. I need some help with the rear shock too because I Dam near bottom the one I have out. But it's original and many miles on it.

If I had my choice right now I'd want a rear main spring or rear shock/spring. Let me know Taz. And if you already shipped it that's cool too because I will buy it from you if you have something in stock

NP we can do store credit You might want to take a shot at dialing the variater in a little better. You be suprised what rollers have to offer. lol

Taz

Okay let's do some variater weights then and do you have any belts? And how about a temp gauge and do you carry any of the rear torque springs?

I wanted to give a update on how things are going... I can now reach a GPS confirmed 58 mph so I'm happy with the top speed but now my temp rises close to 400 degrees with anything past 35mph. So I will be needing a larger main jet. I have a 100 in at the moment. I might have to finally go and get a 24mm oko carb and intake.....