Honda Spree and Elite 50 Forums

gap the plug at 0.025
swimmingfree

Thank you, I will do that when it gets light here and I can get a new plug and a gapper.
Dave

spree are simpull but a pain in the A.S.S
when you get it running wright you will have fun with it ..
swimmingfree
ps
what color is the plug and the id number on the plug

The plug is white.
I saw that yesterday.
I will check the ID # when I pull it today.
Briggs&Stratton, it's either a plugged high
Speed jet, or a bad diaphram.
Ths Spree is driving me wacko!!!

Bad plugs have been the issue many times here.

I am as dumb as they come.... New liquids, lines, and new plugs have always work well for me.

Assuming clean carb and compression.

Best of luck.

I hope it is only a plug,
I am down to $5.00.

rawhead wrote:The plug is white.

]the part that goes in the motor it shood be brown or black white means its lean and not good you have a big air leak some were ...
swimmingfree

The part inside the motor is burned white like white ashes.

you need to stop playing with the carb and start looking for a air leek!!!!!
are the 2 o ring in place between the carb and the manifold???
swimmingfree

Yes, the o-rings are in there.
Maybe crankseal? :t

do you have them in wright ??the one no the brown thing shood go to the motor ...
as for the seal on the case i don no how to tell if there bad or not ....
swimmingfree

http://www.ebay.com/itm/Honda-Spree-NQ5 ... 33604d77c6
heres some seal if you need them form tazland001 ..
swimmingfree

I got them right.
Have you ever done a crankseal?

yes not a big deal if you can get the fly wheel off ... did you pull the plug ??? is it white (a photo wood be nice )??? what the gap??
swimmingfree

I took it off yesteray, it was white at the gap and
Around the gap. I am taking it off today.
Do you know which plug it takes?
How do I take the flywheel off?
Do I need a fywheel puller?