Page 2 of 2
Re: Trying to get this "look" with my spree
Posted: Sun Apr 21, 2013 1:30 pm
by spreeeeee
do you think this exhaust would work?
dio performance exhaust system
http://www.scrappydogscooters.com/Honda ... aelim.html
Re: Trying to get this "look" with my spree
Posted: Sun Apr 21, 2013 2:31 pm
by paulpauly7
not on a spree motor
Re: Trying to get this "look" with my spree
Posted: Sun Apr 21, 2013 2:33 pm
by spreeeeee
ok do you know what pipe i can buy for a stock spree engine?
Re: Trying to get this "look" with my spree
Posted: Sun Apr 21, 2013 2:35 pm
by paulpauly7
in the link given to on the previous page
Re: Trying to get this "look" with my spree
Posted: Sun Apr 21, 2013 2:38 pm
by spreeeeee
ill give it a shot
Re: Trying to get this "look" with my spree
Posted: Sun Apr 21, 2013 5:06 pm
by NZHonda
I have decided to stretch my spree dio. If you have a look at this page here it shows the kit you can buy and what they supply.
http://japan.webike.net/products/2076503.html
The hardest part will be sourcing new rubber bushes to go into the mounting tubes.
TRU72 : how much of a stretch is on your bike?
Re: Trying to get this "look" with my spree
Posted: Sun Apr 21, 2013 6:11 pm
by spreeeeee
another thing is the back plastics over the rear wheels, do you have to cute those to get them smaller like how those are? or is there plastics you can buy like that?
Re: Trying to get this "look" with my spree
Posted: Sun Apr 21, 2013 6:16 pm
by swimmingfree
yes you have to nible on it some blow the tail light...
frist i wood the out the motor mount and make it to the new length put it in ans see what else you need to do ...it a one step at a time thing ... talk to you dad welder friend and show him the photo ..
simmingfree
Re: Trying to get this "look" with my spree
Posted: Mon Apr 22, 2013 1:10 pm
by tru72
well after talking to a friend here, Im going to try and get more of those pipes.
if interested pm me, like i told him they are all hand made to order.
low ballers and cheapskates need not apply LOL!
Re: Trying to get this "look" with my spree
Posted: Mon Apr 22, 2013 2:17 pm
by Wheelman-111
Greetings:
What pipes are these, Tru.
I'm both a low-baller AND a cheapskate, but I gotta know...
Re: Trying to get this "look" with my spree
Posted: Mon Apr 22, 2013 5:26 pm
by motormike
...Mr. spreeeeee: Take the advice of these people and spend your money on something other than a Spree if you TRULY want a bike with the lowrider look.
Spree is best left alone and used as a utility vehicle in stock form.
I may be old and gray and totally disconnected with the cool world of lowrider scooters, but Spree is about the worst place to start when building a cool scooter.
ENGINE SWAP is a total must....rock-on.... 
Re: Trying to get this "look" with my spree
Posted: Mon Apr 22, 2013 9:40 pm
by patthesoundguy
Motormike is right on, (ptsg bows to the wise Motormike) . I also think if you aren't the fabricator yourself I'd almost forget a project like making lowrider streched spree. Having wanted to do stuff like that as a kid having to rely on someone else to weld and fabricate things, I don't do it if I can't do it for myself now, it sucks to have other people doing it, you are at their mercy. Save your money up, buy some tools like a welder, chop saw, angle grinder and learn how to weld and go to town on somthin. Just my 2 cents
Sent from my Nexus 7 using Tapatalk 2