Page 2 of 2
Re: Custom parts for the elite/spree..suggestions. LED headl
Posted: Sun Nov 10, 2013 8:05 pm
by kingearwig
what kind of price are we looking at on the bmx clamp?
btw cool idea on the vapor mount!
Re: Custom parts for the elite/spree..suggestions. LED headl
Posted: Mon Nov 11, 2013 8:56 am
by noiseguy
On the headlights. Suggest coming up with a low mount that uses the three bolts on the front body cover. This moves the headlights off the headstock and on to the body. Then you can run BMX style handlebars without losing the headlamp.
Re: Custom parts for the elite/spree..suggestions. LED headl
Posted: Mon Nov 11, 2013 2:59 pm
by noiseguy
There you go...
Re: Custom parts for the elite/spree..suggestions. LED headl
Posted: Mon Nov 25, 2013 5:43 pm
by micbergsma
I like the leds in the headlight but what about pull the stock bulb out and install the leds in the hole and hold from there?
Re: Custom parts for the elite/spree..suggestions. LED headl
Posted: Tue Feb 25, 2014 8:41 pm
by Wheelman-111
Greetings:
Usually when I pull the engine, the pipe comes off and I sandwich the rear wheel between the jaws of my cheap WorkMate Jr. If I didn't have that tool, a stand sure would be handy.
Re: Custom parts for the elite/spree..suggestions. LED headl
Posted: Tue Feb 25, 2014 10:36 pm
by Wheelman-111
Greetings:
Wait...what?! People cut boost ports without splitting the case? Really, really bad idea unless you have a trick for this.
Stand design draw-rings to post? Just sketch and phone pic.
Re: Custom parts for the elite/spree..suggestions. LED headl
Posted: Fri Apr 25, 2014 1:15 pm
by Cam-V53
Would that bmx bar clamp work on an aero?
Re: Custom parts for the elite/spree..suggestions. LED headl
Posted: Mon Jun 09, 2014 1:00 am
by lp3's honda elites
Hey I am interested in the larger fuel tank you should make it.