Page 2 of 2
Re: I finally got my 21mm carb kit on my spree :-)
Posted: Sat Jul 06, 2013 1:41 pm
by patthesoundguy
Im going to run the oring after break in, and i have to order one anyway, time to gather up a treat land, i wonder what other goodies i need
Sent from my LG-C800G using Tapatalk 2
Re: I finally got my 21mm carb kit on my spree :-)
Posted: Sat Jul 06, 2013 2:20 pm
by patthesoundguy
It started up real nice and idles perfect. I have a 45 pilot and a 95 main in it. Heat cycle numer one now in progress
Sent from my LG-C800G using Tapatalk 2
Re: I finally got my 21mm carb kit on my spree :-)
Posted: Sat Jul 06, 2013 2:45 pm
by deuce217
If you shave the head down below the o-ring seat you can just use a standard gasket they work fine.
Re: I finally got my 21mm carb kit on my spree :-)
Posted: Sun Jul 07, 2013 8:02 pm
by patthesoundguy
Big bore kit seems happy, just did a short little break~in burn in the city with the spree, temps are good not really going above 300f B-) diddnt take it past 6500rpm but thats fast enough for the city. And I keep varying the throttle. Its a lot of fun
Sent from my LG-C800G using Tapatalk 2
Re: I finally got my 21mm carb kit on my spree :-)
Posted: Mon Jul 08, 2013 12:14 am
by deuce217
It is entertaining riding a spree. I Hope to do a dio on a spree one of these days. I have the engine, just need another clean spree. The best part of the spree is its agility IMO.
Re: I finally got my 21mm carb kit on my spree :-)
Posted: Tue Jul 09, 2013 8:49 am
by patthesoundguy
When I put the plastics back on the airfilter I had for the carb, just wouldn't fit, the plastic was too tight against the carb. So I ordered a with a bend in the tube for clearance. But it will take forever from China. So off to home depot I went and came up with this
filter
Couldn't break in my BBK with out an air filter
Sent from my Nexus 7 using Tapatalk 2