Tuning help

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

User avatar
Rip_City_Spree
CB900F
CB900F
Posts: 1211
Joined: Sun Jun 13, 2010 7:47 pm

Re: Tuning help

Post by Rip_City_Spree »

Well didn't think I would get to do anything on the bike today but I had a few mins and w
It wasn't raining so I threw in a 104 jet down from a 105. Used my handy new clutch tool and pulled the clutch off and tightened up the clutch didn't have time to pull the contra but that will happen tomorrow.

Ran better couldn't get it to sputter on the top and I tried like * to push it. So I stoked with that temps only got up to 340. Not sure about speeds but not overly concerned about that right now. But it's heading in the right direction. Thanks for help all
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
User avatar
Rip_City_Spree
CB900F
CB900F
Posts: 1211
Joined: Sun Jun 13, 2010 7:47 pm

Re: Tuning help

Post by Rip_City_Spree »

I will I put in a new one this week. Shoulda bought the one other one they had there. Think I'm gonna pull everything of and check head bolts and such just make sure s*** is still tight this weekend
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Post Reply