Page 2 of 2
Posted: Mon May 02, 2005 8:22 pm
by usdthrone23
i got the carb and intake off and filed the intake down and its fine but the exuast i got for free fro ma friend who had it on his razz is about a quarter inch off so im going to try to torch a piece of the back plate off were it will fit if that doesnt work ill just stick with the stock 8O
Posted: Wed May 04, 2005 8:26 pm
by zoom
I made a mistkae . I bored out the bottom of that intake i didnt bore it much . but do yallt hink it will be fine?
Posted: Wed May 04, 2005 8:33 pm
by vette76
as long as u didnt go past what the gasket will seal.
Posted: Wed May 04, 2005 9:43 pm
by zoom
Nahh i ddint go that far.
Posted: Wed May 04, 2005 10:01 pm
by vette76
should be fine. mine isnt the best either.its hard with a straight file.
Posted: Wed May 04, 2005 10:47 pm
by zoom
After i dremeled it I used a round file.