Honda Spree and Elite 50 Forums

Posted: **Mon Oct 31, 2005 6:03 pm**

yes sir.

Posted: **Tue Nov 01, 2005 5:06 pm**

Yep, 2 wire hook up and most speed shops will make a wire for about $10

Posted: **Tue Nov 01, 2005 8:39 pm**

Or you can buy a foot of copper motorcycle coil wire, and use the kit with the MSD and the stock Spree cap to make your own.

Posted: **Tue Nov 01, 2005 11:38 pm**

Well thats your option, and as they say speed doesn't come cheap! and i have my standards so i do it right....

Posted: **Thu Jan 19, 2006 8:15 pm**

Jegs is currently selling for $39.99 and that's free shipping.

Posted: **Wed Jan 25, 2006 8:06 pm**

Are they any good?

[img][img]http://img88.imageshack.us/img88/674/ad1b6cc.th.jpg[/img][/img]

[img][img]http://img88.imageshack.us/img88/2746/b81b5oq.th.jpg[/img][/img]

Posted: **Wed Jan 25, 2006 8:13 pm**

Hey i got that on my elite it works really good. we put it on a stock spree and it gave me a added 3mph and some extra acceration.

Posted: **Wed Jan 25, 2006 8:17 pm**

So, it would be a good investment then right?

Posted: **Wed Jan 25, 2006 8:18 pm**

* yeah it is.

Posted: **Wed Jan 25, 2006 8:19 pm**

I am going to go on and buy 3 then.

Posted: **Wed Jan 25, 2006 9:16 pm**

What the * is that? Aftermarket coil added 3mph on a Spree?

Posted: **Wed Jan 25, 2006 9:33 pm**

You are looking at the HIGH ENERGY IGNITION COIL for your early or late model Honda or Yamaha Scooter, moped or ATV (POPULAR HONDA MODELS INCLUDE HONDA ELITE SA50 SR50 SE50 SB50, AERO NB50, SPREE NQ50, EXPRESS NC50 NA50 NX50 crf50 and xr50 RUCKUS, METROPOLITAN ch50p aka JAZZ, SYM, GYRO ) (POPULAR YAMAHA MODELS INCLUDE JOG CG50 CY50, ZUMA BW BWS, CW50 YW50, RAZZ SH50, VINO YJ50, MAKO, APRILIA, VENTO TRITON ZIP BKM JAZZ r3i, VENICE, HUSSAR, ETON BEAMER ) larger 7MM wire to the high capacity coil will deliver much higher spark voltage for better combustion efficiency and guaranteed less spark plug foulage!! This in turn will optimize fuel mileage, power and performance (WITH GAS COSTS ON THE RISE THIS MAY BE THE ONLY PERFORMANCE UPGRADE WHICH WILL ACTUALLY SAVE YOU MONEY!! ) Not sure if this unit will fit your application? Just ask. I have noticed that many of the other scooters on the market use this same type of design (see photos) on their scooters. So even if you don't see your scooter listed or you have a nonbrand name scooter, it is certainly very possible if not probable that this high energy ignition system will work for your vehicle. The most important thing is that your scooter is 12 volt. Total length from end to end is 19 inches. This unit is tried and tested and very easy to install (simply unplug your factory coil and replace). Will work well by itself but is especially effective when using high octane fuel for high performance applications with larger cylinder, carburetor etc.

Posted: **Wed Jan 25, 2006 11:14 pm**

yep i noticed a difference when i put top notch gas in mine.

Posted: **Wed Jan 25, 2006 11:17 pm**

eBay?

Posted: **Thu Jan 26, 2006 1:02 am**

the best coil is STOCK!!! no need to change it, unless it breaks or malfunctions. and when it does, your best be it to change back to the stock one. the aftermarket ones are made as cheap replacements for those who dont want to spend the cash to get one from the dealer

Honda Spree and Elite 50 Forums

MSD Blaster

Anyone using these?

Here is what it says......