anybody run w/o a petcock? /thread size

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
circusracer
Goped
Goped
Posts: 83
Joined: Wed Sep 10, 2008 10:08 am
Location: Ovid, MI

Post by circusracer »

Wheelman-111 wrote:Greetings:

Before you mutilate any innocent petcocks, be aware that these fittings can be purchased in the plumbing department of any Home Depot near you:
Hey Wheelman, my petcock wasnt so innocent. You have ever have your 15 year old daughter get mad at you because she had to pull off to the side of the road and suck on the vacuum hose to get some fuel? LOL
I wanted my fuel NOW, no ands, ifs, or buts. I wanted to eliminate all possibilities of standing my 15 year kid. :wink:
84,85,86 sprees: Intake mod, drilled pipe, .020" milled 1985 head, dome piston, 2mm raised exhaust port, sb50 reeds, 34mph average.
Top
User avatar
Wheelman-111
Moderator
Moderator
Posts: 10683
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Filtration

Post by Wheelman-111 »

Greetings:

The filter flowed. Fine. Replaced by smaller mineral cone type for other reasons.

Hmm daughter stranded by dry Spree bowl = Dad in doghouse.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Top
User avatar
circusracer
Goped
Goped
Posts: 83
Joined: Wed Sep 10, 2008 10:08 am
Location: Ovid, MI

Post by circusracer »

Update: I had to remove the aftermarket filter. For some reason it decided to become a restriction.
84,85,86 sprees: Intake mod, drilled pipe, .020" milled 1985 head, dome piston, 2mm raised exhaust port, sb50 reeds, 34mph average.
Top
Post Reply

Return to “Technical Help”