Honda Spree and Elite 50 Forums

Posted: **Mon Jul 20, 2009 2:26 pm**

Could I do this on my 1989 Honda SE50?
I got pretty much the same exhaust.
Stock.
Thanks

Posted: **Mon Jul 20, 2009 4:06 pm**

I'm sure on any exhaust it could work, but i may be wrong, and you might need to upjet to make up for running lean.

Posted: **Mon Jul 20, 2009 6:17 pm**

toboggan wrote:I'm sure on any exhaust it could work, but i may be wrong, and you might need to upjet to make up for running lean.

Ok, well if anybody knows for sure that this will work. I'm going to try it on my scoot

Posted: **Mon Jul 20, 2009 6:52 pm**

Cleaning the muffler will have the same effect.

Posted: **Thu Jul 23, 2009 11:21 pm**

So would this work on my 1989 Honda SE50 (SA50)
Just clarifying.

Thanks

Posted: **Fri Jul 24, 2009 1:52 am**

How deep are the holes drilled? Just thru the outer skin, or thru the rear and next baffle? I don't see how just thru the outer skin would do anything much less pull 10 mph out of a Spree.

Posted: **Fri Jul 24, 2009 5:05 pm**

I agree with bear. Drilling exhaust wont even get 10 mph out of a Dio!

Posted: **Tue Jul 28, 2009 8:04 pm**

As I mentioned before, I drilled four inches into the muffler and yes it is MUCH louder. Also, my scoot would barely hit 25mph prior to drilling holes. Now it cruises right up to 35-37mph per the speedo. I'm 160 lbs and 5'8" tall if that helps.

No other modifications have been made to the spree. I'm also not saying it will work for everyone, just happened to work for me.

Honda Spree and Elite 50 Forums

Drilled holes in my exhaust = +10MPH!!!!

Re: Drilled holes in my exhaust = +10MPH!!!!

Re: Drilled holes in my exhaust = +10MPH!!!!

Re: Drilled holes in my exhaust = +10MPH!!!!

Re: Drilled holes in my exhaust = +10MPH!!!!

Re: Drilled holes in my exhaust = +10MPH!!!!

Re: Drilled holes in my exhaust = +10MPH!!!!

Re: Drilled holes in my exhaust = +10MPH!!!!

Re: Drilled holes in my exhaust = +10MPH!!!!