Honda Spree and Elite 50 Forums

bakaracer wrote:yeah try that. what rpms are you turning?

Superman's rpm's are @ 10300

Kryptonite's rpm's are @ 12600

Wow thats weird seeing someone else in the gopro video! haha

Hey Drew remember i have a GoPro camera too looking like i workin on being up there on the weekend of 22-24th for the Mopars agaist the World event

so be ready for some crazyness! !!

K now back to my cave
-Ben

Mmm the cave water is sooo nice . . . Its about 92deg and full of jets and bubblely . . . o wait shouldn't I be building a drag moped he he he na maybe tomarrow

anyway back to my cave
-Ben

Tried 9.1 gears instead of 8.4 gears.

60 ft times dropped by .1 sec

but MPH and ET went down 57mph / 11.1 sec avg

I made a run during times trials @ half throttle.......best time of 10.9 seconds.
Maybe there is something to this half throttle business.

For tomorrows races I will try very tall gears on my 125.

I was thinking about 6.9:1 I know my 60ft will suffer but I want to see if the MPH or ETs go up or down.

I am stuck @ about 10300 rpms on this Cheap V8 pipe, so gearing is my only option if I wanna break 60mph in the 1/8th

Spreemadness will be there racing the 125 against Jr Dragsters, so the 6.9:1 gears should rocket him past 70mph.

I hope you are ready for the extra top speed. 70mph scooters get lots of attention

Hahahaha I think I already have enough attention

I got my fastest run last night, .006 reaction time, 9.291 @ 70

Good job

Trafficjamz wrote:Tried 9.1 gears instead of 8.4 gears.

60 ft times dropped by .1 sec

but MPH and ET went down 57mph / 11.1 sec avg

For tomorrows races I will try very tall gears on my 125.

I was thinking about 6.9:1 I know my 60ft will suffer but I want to see if the MPH or ETs go up or down.

I am stuck @ about 10300 rpms on this Cheap V8 pipe, so gearing is my only option if I wanna break 60mph in the 1/8th

I actually went faster mph and ET

60 ft dropped by a bit

new fastest time for 125cc superrman
2.49 sec 60 foot
10.737 sec 1/8th mile
63.23 mph
9700rpm
6.9 gears

Maybe some 7.5 or 8.0 gears will help my ET with out killing my 60 ft

New Parts

I just got the ct black intake......well half of it is black ......the bigger one

Also got some V force 3 reeds. Thanks Justin.

Stage 6 velocity stack and uni filter to fit came in today too thanks to S4Patrick.




To fit this bigger intake requires a bit of modification.

The lower part of my CT Black is identical in it's physical dimensions as my regular CT manifolds. It is the upper part that is different. I have two different carb spigots with mine, the standard big one for the OKO carbs and a small one, 23 mm.

New * pan for kryptonite






I told him to use 1/4" steel for the seat But he did not listen to me.

Superman's new home.

Introducing .......the aero80superframe

And I have a flip up seat



I used 1/8th flat stock

kyptonite used chicken wire and tape