Page 13 of 20
Re: 89 Elite R - my first build
Posted: Fri Dec 09, 2011 9:01 pm
by 89eliteR
Lets play a game of what goes where!
Fist off, there are 2 lines that connect to the bowel of my carb, where do they connect to?
Also see one on the front of the carb without a hose, at the bottom of the bowel? do I connect a hose to it? and where does the other end go?
Now there is a nipple for the intake, I think one of the lines from the tank go here, but which one?
im pretty sure the main gas line goes to this brass end here, by all means correct me if im wrong.
Re: 89 Elite R - my first build
Posted: Fri Dec 09, 2011 11:31 pm
by bonesv
Nice job getting it buttoned up! I like it!
Where did you get the carb. from and what is the brand name and size?
You are correct about the brass fitting on the carb. and the nipple on the manifold is for the vacuum line.
Just suck lightly on one of the lines, when gas comes out of the other line then you have the vacuum line.
I'm not sure about the other lines, they are probably drain lines and/or vent lines.
I would consult the seller about those. 
Happy Trails!
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 2:05 pm
by tazland001
The intake has a nipple for the vacuum line. The rest are for drain and vent.
Taz
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 2:18 pm
by 89eliteR
One thing to clairify, on the part that comes out of the tank has 2 lines. One goes down the other comes out on the side. I belive the one on the side goes to the brass nipple on the carb, and the one that goes down is the vaccume line?
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 2:20 pm
by swimmingfree
yes!!!!!!!!!!
looking good...
swimmingfree
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 2:24 pm
by 305elite
The two lines that come out the gas tank one is fuel and the other is vacuum...fuel goes to the brass nipple and the vaccum goes to the barb on the manifold...as for the one on the bottom of the bowl just leave it it is nothing...good luck and hope this helps
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 2:28 pm
by 305elite
This looks like tazmans 21mm pwk carb package....if it is you will like it i just reacently installed the same setup on my new polini corsa build amd i was really impressed its a nice setup
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 2:45 pm
by 89eliteR
It is Taz's kit. Just waiting for my variator to come in and ordered a new belt and should be able to do some test runs in a week or so
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 3:43 pm
by 305elite
nice....so you got all the lines figured out?...what vari did you decide to go with?
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 3:49 pm
by 89eliteR
ordered a stock ruckus vari from a dude off here. as far as the lines i might do that tonight. If i do i will post pictures for conformation.
Re: 89 Elite R - my first build
Posted: Sun Dec 11, 2011 6:37 pm
by 305elite
Sweet...post pics forsure...good luck
Re: 89 Elite R - my first build
Posted: Tue Dec 13, 2011 11:53 am
by 89eliteR
Re: 89 Elite R - my first build
Posted: Tue Dec 13, 2011 12:33 pm
by Mystic
Looks good to me. I bet you are ready to get this puppy rolling huh? why not put her back together with the stock vari and weights and take her for a spin?? I know I would
Re: 89 Elite R - my first build
Posted: Tue Dec 13, 2011 12:44 pm
by 89eliteR
Mystic wrote:Looks good to me. I bet you are ready to get this puppy rolling huh? why not put her back together with the stock vari and weights and take her for a spin?? I know I would
sold the ramp plate from the stock vari otherwise I would have. My vari could be here any day now tho.
Re: 89 Elite R - my first build
Posted: Tue Dec 13, 2011 3:37 pm
by 305elite
looking good everything seems to be in place
