Honda Spree and Elite 50 Forums

C3Killer wrote:I can't wait to get my undercowl painted and on the bike. Nice representn' there bakaracer! Nice to see an 87 out there keeping up/passing some of the bigger bikes. Can I get the specs on your handlebar clamp? I am thinking drag bars! Thanks for the pics!

the clamp I'm using is a heavy duty bmx stem clamp 1 1/8th with a shim.I cut the bottom half off of the stock bars so the I'm using that half to clamp onto the fork stem.the bars are 7/8 bars for a crf50 or ktm50 or mini moto. If you go with drag bars,they will be way to low and to far foward.the bars on my race bike sits lower and is narrower than the bars on my black 87 street bike.you find those bars on ebay for around $25 shipped

bakaracer wrote:

SPREEtown wrote:great stuff. that under cowl is oh, so sick. is there an intake scoop in it? anyone seen them for sprees??

Air scoop like for the carb or air shroud for the cylinder? No undercowls for spree's. They are to low to the ground already.

yeah, does it force air up into the cylinder shroud/engine cooling?

Nah, doesn't look like it, just for looks.

C3Killer wrote:Nah, doesn't look like it, just for looks.

its not for looks.Its for down force on the front.thats why it has that scoop with the 2 slots cut out.Thats why I said if you don't want to much drag from the undercowl to cut that section out in the front of the undercowl. if that section is cut out, air flows through to the engine.

Oh yeah, I meant it doesn't assist the cooling process. My bad. Does look good tho!

guys on the west coast that want to race. check this website out for a race near you. http://pacificscooterracing.com/

for the washington state guys,if you want to start racing or want to try it out. pm me and we can set something up at the pgp kart track for a practice to see how you like it.

You oregon guys.if you want to check the scooter racing out.there is a race at pat's acers this weekend .Saturday practice and Sunday racing. Go check it out

here is a video of the final in the 190cc mod class. http://www.youtube.com/watch?v=sXjEj25l ... r_embedded

bakaracer wrote:You oregon guys.if you want to check the scooter racing out.there is a race at pat's acers this weekend .Saturday practice and Sunday racing. Go check it out

Pat's acers kart track is in canby,OR just south of portland.it starts at 9am on both days.if your racing get there by 630am

You guys in the portland area, come to pat's acres kart track in canby,OR on Saturday or Sunday to check the scooter racing going on. Its a cup race so there will be lots or racers and good riders there.

That video is sweet! Few questions:

What happened to the scooter in front of you at the ~53 second mark, miss a shift, blow a motor, etc?
Didn't you come in first in that race?
I never saw you reel in #68 after he passed you?
What was the #68 scooter?

I'm #68 the lone honda in the race. The rest are vespa's with 133cc and up. The guy that pulled off I think blew up.

Oh, I thought the video was from the front of your scooter.

The pics I posted on the first page is of my bike, how could you think that same bike in the video wasn't mine?