Page 3 of 4
Re: how much speed could a stock spree handle
Posted: Sun Sep 18, 2011 7:40 pm
by Trafficjamz
B-Nasty wrote:
I would be leaving the stock motor and not cutting the frame at all.
hoping for 65mph
I know most will laugh at the above statement but I will be adding a power source

Extra power without taller gears will do nothing for top speed.
B-Nasty wrote:All stock gearing on the spree motor and not pushing it beyond a safe limit.....think outside the box
If gearing lets the spree go 32mph @ 8500rpm 65mph will need to rev to about 17000 rpm's
B-Nasty wrote:I am going to blow yalls minds. build thread should start in a week or two after i get all the parts
Keep on trollin'

.........I will be the first to say I told you so.
good luck on your

Re: how much speed could a stock spree handle
Posted: Sun Sep 18, 2011 8:26 pm
by atomBOOM
the title of the thread is rhetorical. you are supposed to guess. I'll play. does it involve plutonium or dilithium crystals?

Re: how much speed could a stock spree handle
Posted: Sun Sep 18, 2011 9:42 pm
by Bear45-70
Just a set up like this.

Re: how much speed could a stock spree handle
Posted: Mon Sep 19, 2011 12:08 am
by Trafficjamz
Bear45-70 wrote:Just a set up like this.

That might do it

Re: how much speed could a stock spree handle
Posted: Mon Sep 19, 2011 2:16 am
by niftyman
Come on tell us about your secret power source we could do with a good laugh
Re: how much speed could a stock spree handle
Posted: Mon Sep 19, 2011 2:19 am
by niftyman
Hey i got it your gonna park on a rail road crossing get hit by a train that would get the spree up to 65mph and spare us your BS threads
Re: how much speed could a stock spree handle
Posted: Mon Sep 19, 2011 8:33 am
by Wheelman-111
Greetings:
I hope it works ...

Re: how much speed could a stock spree handle
Posted: Mon Sep 19, 2011 10:27 am
by B-Nasty
Its really much more simple then yall think....some parts are in, still waiting for more. I should be starting the build in about a week.
Re: how much speed could a stock spree handle
Posted: Mon Sep 19, 2011 10:46 am
by swimmingfree
some parts are in??
if your going to fish you shod give us some bate you no like whats in???
swimmingfree
Re: how much speed could a stock spree handle
Posted: Mon Sep 19, 2011 11:01 pm
by tuserv
Re: how much speed could a stock spree handle
Posted: Tue Sep 20, 2011 3:06 pm
by B-Nasty
Trafficjamz wrote:B-Nasty wrote:
I would be leaving the stock motor and not cutting the frame at all.
hoping for 65mph
I know most will laugh at the above statement but I will be adding a power source

Extra power without taller gears will do nothing for top speed.
B-Nasty wrote:All stock gearing on the spree motor and not pushing it beyond a safe limit.....think outside the box
If gearing lets the spree go 32mph @ 8500rpm 65mph will need to rev to about 17000 rpm's
B-Nasty wrote:I am going to blow yalls minds. build thread should start in a week or two after i get all the parts
Keep on trollin'

.........I will be the first to say I told you so.
good luck on your

haters gonna hate
Re: how much speed could a stock spree handle
Posted: Tue Sep 20, 2011 3:22 pm
by Bear45-70
B-Nasty wrote:haters gonna hate
Yeah, but your fantasy will not change physics, which say you are full of

Re: how much speed could a stock spree handle
Posted: Tue Sep 20, 2011 7:46 pm
by Trafficjamz
B-Nasty wrote:haters gonna hate
If there was a simple way to make a spree do 65mph........one of us would have already figured it out.
I really wish there was a simple way to get speed from a spree......but there is not
Every once in a while some

thinks he knows how to make the spree fast.
So excuse me if I am more than skeptical of your power adder, that triples the HP and doubles the top speed.
So fill your tires with helium, make a hair dryer turbo, drill holes in your exhaust,
change your oil,strap on your jet pack and find a big hill, or whatever you think will help.
And when you fall short of your 65mph goal, I will show you how to do it for real.

Re: how much speed could a stock spree handle
Posted: Tue Sep 20, 2011 9:31 pm
by PimpinSpree
Only thing I can think is towing it. If the motor was off, Would going that fast cause damage?
Re: how much speed could a stock spree handle
Posted: Tue Sep 20, 2011 9:46 pm
by sprite2011
This thread is full of s***. OP wake up and smell your gf's period.