Honda Spree and Elite 50 Forums

Much thanks to all of you who have been helping me out with this build/post, I cant wait to have this elite all suited up for the eye candy pleasure. No doubt I am looking for a sweet bro deal on a stock complete dio or sym dd50 engine. Let me know also open to donations, can pay for shipping, just bill to receiver or however that works . Aloha and thanks for checking in.

-kolten umm... duh me Lol

Alright, so this is how the SE50 stands for now

Had to barrow Sym DD engine, mirrors, and used some front turn signals from scrap parts

So close that exhaust fits

I toyed around with making my own EDIT license plate, 2SLW4UFATAS, it does not really have that

Ok I know I haven't made much progress lately to the SE50, with tests and work, got to make money to spend money. I took a gander at a you tube video, and it looks like this guy in canada had recieved a PG short exhaust for his 63cc kit se50. Will it be possible to bolt on a PG short to an SE50?
Here is the link to this guys youtube vid:
http://youtu.be/Lpgzpfna5rQ

Kolten wrote:Ok I know I haven't made much progress lately to the SE50, with tests and work, got to make money to spend money. I took a gander at a you tube video, and it looks like this guy in canada had recieved a PG short exhaust for his 63cc kit se50. Will it be possible to bolt on a PG short to an SE50?
Here is the link to this guys youtube vid:
http://youtu.be/Lpgzpfna5rQ

I am pretty sure that the pg short does not fit the se50,

Update:
1. Sanding - Just your standard Assorted sanding kit 100, 150, 220 grit.
2. Paint - Gloss Black, Fire red, Gloss
3. cleaning and installation - I cleaned the cylinder head for the new cylinder kit to be installed, changed transmission oil, sand down variator boss couple microns, changed fuse, reinstalled AF05E engine.

4. Waiting... for parts to show up from Vtcycles:
a) 63cc Big Bore Kit
b) drive belt
parts should arrive tomorrow so... more updates coming soon

lol I forgot to upload some pics

Update:
I had changed the paint again, and after looking at some eliteR's, the pistachio colored panels are now fire red. Put on a IRC 90/90-10 tyre on rear rim feels really nice and raised the back end a little too , I got a little more maintenance left before I post more pics so be patient

cleaned up the front end

wat sand paper grit u used to sand your inner panels n front n back panells?
lmk how u did everything i gotta paint my panels das y

iRiE S0ULJAH wrote:wat sand paper grit u used to sand your inner panels n front n back panells?
lmk how u did everything i gotta paint my panels das y

Sanding - Just your standard Assorted sanding kit 100, 150, 220 grit.
You could also go a much higher grit wet sanding for much smoother finish, get some bondo for filling in deep scratches.

aurright tanks.
but wat grit u started off wit first ?

iRiE S0ULJAH wrote:aurright tanks.
but wat grit u started off wit first ?

I used the 100 to remove gloss and paint, 150 to blend scratches and bumps, than the 220 to be smooth by touch. sand the imperfections, smooth them out, than paint again.

I took some pictures today between 17:50hrs and 18:00hrs (If you don't know the twenty-four hundred hour time reading just count from 12pm, 13=1; 14=2; 15=3 and the minutes stay the same), a couple were dark and the others turned out quite nice for the time of day.

Pictures were taken with an iTouch 4th Gen.

I took these two pictures indoor on some other day.

cheap non lighting enhancement for those who would like some better pictures with bad cameras.

You can see how it helps enhance the contours of the Elite.