Honda Spree and Elite 50 Forums

This is nice work.

another step less

ped wrote:Hi AIO. Do you have a name for that stuff?
what are you building? 72cc?

hi ped,

1- no name,no lebel,no tags,sorry,(a friend give to me, few OZ,s on a Ziploc bag)
2- yes

hi AIO. where can I get a spacer like that?was that pressed on or glued on?
maybe I can use Honda bond to fill the oil pump hole?
your project looks really good.

ped wrote:hi AIO. where can I get a spacer like that?was that pressed on or glued on?
maybe I can use Honda bond to fill the oil pump hole?
your project looks really good.

Any machine shop can make one+loctite primer +red loctite +pressed in.
You can use any metal/alum filler/epoxy ,gas and oil proof+500┬░f res +high heat fiber glass fabric
Thank you.

DirtyE wrote:This is nice work.

Thanks DirtyE

Hi AIO. so are you going to use 2 seals on the crank? On that side of the case?

ped wrote:Hi AIO. so are you going to use 2 seals on the crank? On that side of the case?

hi ped

No,just one,why you thinking on two?

hi forum

after a several month I'm back to put some time and money in my project(no money no project)


factory gasket not good

home made gasket good fit flow

very nice work. looks clean.

Lambretta 50mm air filter

ped wrote:very nice work. looks clean.

Thanks Sir Ped

Carb upgrade!

We use sudoco at the shop for parts, how much was the carb through them?