Posted: Fri May 23, 2008 10:01 pm
That aint a bad idea.noiseguy wrote:Anyone thought of making a ghetto-style NOS setup using an airbrush full of gasoline pushed through by NOS?
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://fastfoamfilter.com/hondaspree.net/phpBB3/
Nos on a moped
http://fastfoamfilter.com/hondaspree.net/phpBB3/viewtopic.php?t=5322
Page 3 of 4
Posted: Sat May 24, 2008 12:26 am
It would certainly be cheaper than $600.
Posted: Sat May 24, 2008 12:57 am
To use a wet kit on a scoot, you'd need to run a fuel pump. Plus the current draw for the soleniods. How many amp is a spree charging system? I have a couple of nitrous kits, but I dont want to destroy my engine. and I think it might be a strech to fit a 10lb bottle on a scoot.
Posted: Sat May 24, 2008 10:32 am
Its enough to run it for the 4 or 5 seconds it gets used every hour, you can get 10oz units, holly made a special kit for gopeds that came with a 10oz and an RC battery pack connector.fireblade wrote:To use a wet kit on a scoot, you'd need to run a fuel pump. Plus the current draw for the soleniods. How many amp is a spree charging system? I have a couple of nitrous kits, but I dont want to destroy my engine. and I think it might be a strech to fit a 10lb bottle on a scoot.
Posted: Sat May 24, 2008 5:56 pm
CONGRATS KENNY!
You have got 1337 Posts!
You have got 1337 Posts!
Posted: Sat May 24, 2008 6:55 pm
I am t34 1337 *!
Posted: Tue May 27, 2008 9:51 pm
Posted: Tue May 27, 2008 10:00 pm
This is just a hint of whats to come. Ill let MopedMan post pictures himself when he says its done.
Posted: Tue May 27, 2008 10:22 pm
Wouldnt you want the bottle angled up so it only gets gas instead of liquid?
Posted: Tue May 27, 2008 10:25 pm
Kenny_McCormic wrote:Wouldnt you want the bottle angled up so it only gets gas instead of liquid?
Posted: Tue Jun 24, 2008 4:22 am
no, you want it with valve up and the label out so the siphon tube gets to the bottom. the goal is to draw liquid with as little gas as possible. the gas is what gets purged out before spraying, if you've ever sprayed without purging or with the bottle disoriented you can feel it chug out when it runs out of liquid nitrousKenny_McCormic wrote:Wouldnt you want the bottle angled up so it only gets gas instead of liquid?
Posted: Tue Jun 24, 2008 12:49 pm
Ahh, with my limited experience around liquid gases siphons, and long hoses dont mix guess NOS is a lil different.
Posted: Thu Jun 26, 2008 5:21 am
Couldn't you use a "T" fitting on the fuel line and still use a wet set-up? I know our scoots don't have a fuel pump. But I figure the shot of the nos would cause a sucking or vacuum on the fuel line and pull fuel out with the shot?
Posted: Thu Jun 26, 2008 6:04 am
NOS is not meant for 2 stroke engines, i am still waiting to see the michigan boys build a true full stroker, its the parts you can't get- i can
Posted: Thu Jun 26, 2008 11:47 am
we can get the parts also, there is such thing as "shipping" you should read about it.maddog wrote:NOS is not meant for 2 stroke engines, i am still waiting to see the michigan boys build a true full stroker, its the parts you can't get- i can
