Page 4 of 8
Posted: Mon Jul 21, 2008 2:39 am
by Kenny_McCormic
All of it minus what come in the aftermarket dio gear kit of you choice.
Posted: Sun Aug 17, 2008 11:07 pm
by da808fokai
I've been watching this thread for a while now (my post count definitely doest show it) but am I correct in saying that this would work for a NB50 as well?
Aren't the SE50 and NB50's motors nearly identical?
Posted: Sun Aug 17, 2008 11:10 pm
by Kenny_McCormic
It would work in a 86-87 NB50, maybe a 85.
Posted: Sun Aug 17, 2008 11:19 pm
by da808fokai
Awesome, thank you... I've been talking to VT about it this past week, but wanted to get clarification before ordering parts.
Lots of great info on this board, did I mention the search function has been my best friend?
Thanks again...
Posted: Sun Aug 17, 2008 11:27 pm
by da808fokai
PimpinSpree wrote:let me get this right, if you look at this picture
i would need to order part number 7. Have the gear on it removed, and then press on the new 8.4 (or whatever) gear. Then take the shaft that comes with gear set machined down to take the splines off, and have the stock se50 gear (part 6 in the picture) pressed onto it?
am i on the right track?
When PimpinSpree mentioned ordering part #7, does that include the axle shaft, or is that just the gear?
Posted: Sun Aug 17, 2008 11:40 pm
by Kenny_McCormic
You only need the shaft, the gear on it and gear 5 are replaced in a gear change
Posted: Mon Aug 18, 2008 10:32 pm
by da808fokai
I see... So looking at the link I posted, if I ordered the gear would it include the shaft? I don't see a place on any of the parts sites to order just the shaft without the gear.
Am I safe to presume if I order the gear, the shaft will be included in part #7?
Posted: Mon Aug 18, 2008 11:20 pm
by Kenny_McCormic
Due to the fact that they are pressed together im assuming they count as one part.
Posted: Tue Aug 19, 2008 4:30 pm
by teeoce
When you order gears from VT, what exactly do you get?
Posted: Tue Aug 19, 2008 4:33 pm
by Kenny_McCormic
2 gears.
Posted: Wed Aug 20, 2008 9:00 am
by teeoce
Which two gears?
Posted: Wed Aug 20, 2008 2:10 pm
by Kenny_McCormic
the one on the axle and the one that touches the axle one.
Posted: Wed Aug 20, 2008 2:31 pm
by teeoce
How does the gear that goes on the axle come on and off? From the looks of the picture on page one, it doesn't show how it comes off (such as on the earlier models).
Posted: Wed Aug 20, 2008 3:01 pm
by Kenny_McCormic
With a big * hydraulic press, thats how.
Posted: Wed Aug 20, 2008 3:32 pm
by teeoce
Kenny_McCormic wrote:With a big * hydraulic press, thats how.
shet