Honda Spree and Elite 50 Forums

Would you think the local honda store would have them or do i need to look online?

And are you sure your cruising at 55mph? Idk how wheelmans gear ratio is taller than yours but you have very close to the same speed.
Whats your top speed with the 8.44:1s?

there not going to be at a honda dealer its an aftermarket part for an old scooter.

Petrock's 1984 Spree wrote:Would you think the local honda store would have them or do i need to look online?

Cant believe that one came out

Never do AP chem and multi-task

Petrock's 1984 Spree wrote:Would you think the local honda store would have them or do i need to look online?

And are you sure your cruising at 55mph? Idk how wheelmans gear ratio is taller than yours but you have very close to the same speed.
Whats your top speed with the 8.44:1s?

You need to look up a place called vtcycles and talk to them. They have everything you need and then some. I hit 74 gps and radar gun verified. I know for sure I can go 55 up hill. Idk what wheelmans top speed is and he has a different set up. I've got a malossi cast iron and a v8 pipe

konaking wrote: You need to look up a place called vtcycles and talk to them. They have everything you need and then some

Okay, ive been on their website but never seen them for sale. Ill call em then, thanks.

konaking wrote: I know for sure I can go 55 up hill. Idk what wheelmans top speed is and he has a different set up. I've got a malossi cast iron and a v8 pipe

Wow really? Thats sweet

I was just hoping and praying for a top speed of 62-63 with ability to cruise at 55 or so

Would you think i could get there with this set up possibly?
1. Corsa
2. Polini vari (ramp, boss, etc)
3. Polini Sport Belt
4. Polini 2g Evo clutch
5. 1k Contra
6. Vented Clutch Bell
7. 28mm OKO
8. PG Long
9. 8.44:1 Secondaries
10. CT mani
11. Aftermarket fan
12. 3.00-10 rear tire

Along with cooler plug, different rollers, etc

Petrock's 1984 Spree wrote:

Petrock's 1984 Spree wrote:Would you think the local honda store would have them or do i need to look online?

Cant believe that one came out

Never do AP chem and multi-task

i know how you feel. but with geometry not ap chemistry.

Petrock's 1984 Spree wrote:

konaking wrote: You need to look up a place called vtcycles and talk to them. They have everything you need and then some

Okay, ive been on their website but never seen them for sale. Ill call em then, thanks.

konaking wrote: I know for sure I can go 55 up hill. Idk what wheelmans top speed is and he has a different set up. I've got a malossi cast iron and a v8 pipe

Wow really? Thats sweet

I was just hoping and praying for a top speed of 62-63 with ability to cruise at 55 or so

Would you think i could get there with this set up possibly?
1. Corsa
2. Polini vari (ramp, boss, etc)
3. Polini Sport Belt
4. Polini 2g Evo clutch
5. 1k Contra
6. Vented Clutch Bell
7. 28mm OKO
8. PG Long
9. 8.44:1 Secondaries
10. CT mani
11. Aftermarket fan
12. 3.00-10 rear tire

Along with cooler plug, different rollers, etc

I wouldn't waste money on all the poloni trans stuff. Just get a new belt,keli varitor, aftermarket ramp,stick with the stock clutch and bell, just change out the triplet springs and center. The variator from vtcycles is 40ish and the triplet springs with the center should only be 25ish. I paid 35 for a new belt from honda. I like the polini natural springs with the 1.5k spring but that's just me.

Eh it's not that big of a waste in my eyes. I'm a junior in high school and plan on taking this to college so i figure I'll just get what I need now. So I figure forking over a few extra bucks in the short term will pay off in the long term. Do you think that set up is capable of making it to 55mph cruise and 60+ for a top speed?

Petrock's 1984 Spree wrote:Eh it's not that big of a waste in my eyes. I'm a junior in high school and plan on taking this to college so i figure I'll just get what I need now. So I figure forking over a few extra bucks in the short term will pay off in the long term. Do you think that set up is capable of making it to 55mph cruise and 60+ for a top speed?

Yes, PICS!!

Ha, yeah I haven't even got the chance to tear into this engine yet

Once I get the cylinder head back from the local cnc shop for the afo5e engine I can get that running while I save up for this monster
I hope to have everything for this new engine midway through summer. I just want to make sure I know exactly what I need to get before I start ordering the wrong stuff. And I think I'm set on those 8.44s. I'd like to see 60+ on the straights at wot, but if I can't make it up the hills to get to the straights then there isn't a point
So I might just have this list figured out unless something new pops up that I don't know about, which seems to always happen. Major here

Alright heres a few pics of whats going on

P1010710 by jpetrak, on Flickr

P1010707 by jpetrak, on Flickr

This is the AF16E assembly i got for $140

And heres what the Spree looks like right now

P1010702 by jpetrak, on Flickr

P1010701 by jpetrak, on Flickr

P1010705 by jpetrak, on Flickr

Once the engine head is completed (for the AF05E) i can throw it back on and have it all put together!

P1010704 by jpetrak, on Flickr

Then i can move the Spree into the garage and pull the AF16E into the storage room to tear into and make it a beast

Anyone know of a good, cheap speedometer?

trail tech vapor. unles you want a GPS then IDK but i want to find a gps for myself.

Man i was hoping for something a little cheaper but oh well

Yeah we've got a garmin gps but its "the family's"
I was hoping to find something cheap for around $50, but that might not happen

Anyone tried a digital bicycle speedo?

THey work I think