Honda Spree and Elite 50 Forums

Done, just need to install the forks.

Installing...

Wow that is really coming together I love this thread, its not the same old swap

Sent from my Nexus 7 using Tapatalk 2

patthesoundguy wrote:Wow that is really coming together I love this thread, its not the same old swap

Sent from my Nexus 7 using Tapatalk 2

Yeah, this build is different for sure.

I decided to add this adjustable support bar like I did on my nh125 spree.

Tyler VR wrote:I decided to add this adjustable support bar like I did on my nh125 spree.

That bar is a very very good idea sprees flex with a stock motor, so I can imagine what it would be like with the big power plant stuffed in it

Sent from my Nexus 7 using Tapatalk 2

patthesoundguy wrote: That bar is a very very good idea sprees flex with a stock motor, so I can imagine what it would be like with the big power plant stuffed in it

Sent from my Nexus 7 using Tapatalk 2

Yup, I can really feel the difference how much the frame stiffens up.

Also got the oil breather mounted, more pics...

how did you get the ch80 forks to fit the narrow spree down tube?

Trafficjamz wrote:how did you get the ch80 forks to fit the narrow spree down tube?

The elite forks fit through the spree frame neck without issue, but the lower spree collar bearing was too narrow. I removed the collar from the frame and used my rotary dremel tool to shave some metal from the inner diameter. It was pretty easy, only took a couple mins to do.

Hit the bare metal with a little primer for now. I'm starting the wiring soon...

Got enough wiring done to run it up and down the neighborhood once in the rain, feeling some nice 4-stroke torque.

I still need to hook up the lights and wire the cluster, the rear brake cable is seized even after soaking in oil the passed few days.

Dude that thing is so rad I bet it wants to wheelie

Sent from my Nexus 7 using Tapatalk 2